SHEET METAL SUPPLY LLC — DOT #957760 FMCSA Safety & Compliance Report

JEFFERSON, Louisiana · DOT #957760 · 4 trucks · 0 drivers · Safety Rating: C

Free FMCSA Audit · 3 minutes · No signup

Run a CFR-cited gap audit on SHEET METAL SUPPLY LLC

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

22-page PDF · 49 CFR audit prep checklist · 6 templates · Unsubscribe anytime

Text this report to the carrier owner →

Carrier Intelligence Score: 69/100 — Moderate Risk

CategoryScoreMax
Safety Rating2230
Inspection Pass Rate1520
Out-of-Service Rate (vs FMCSA national avg)815
CSA BASIC percentilesNot measured

CIS subtotal normalizes 3 publicly-available FMCSA components (Safety Rating + Inspection Pass Rate + OOS Rate) to a 0–100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public Socrata datasets and the SMS portal at ai.fmcsa.dot.gov is not crawlable at scale, so we surface a transparent "Not measured" rather than fabricate a score component. Carriers with a Compliance Review on record may have published BASIC data on the SAFER snapshot for that DOT.

SHEET METAL SUPPLY LLC — JEFFERSON, Louisiana Trucking Company

SHEET METAL SUPPLY LLC is a small carrier operating out of JEFFERSON, Louisiana with USDOT number 957760. The company operates 4 power units and holds a current FMCSA safety rating of C. Based on our analysis of federal safety data, SHEET METAL SUPPLY LLC has a FileFlo Carrier Intelligence Score (CIS) of 69/100, classified as Moderate Risk.

FMCSA Safety Record & Inspection History

Limited inspection data is currently available for SHEET METAL SUPPLY LLC. Carriers with fewer recorded inspections may face increased scrutiny during roadside encounters, as FMCSA inspectors may flag them for more thorough reviews.

What a 69/100 Carrier Intelligence Score Means

A CIS score of 69 places SHEET METAL SUPPLY LLC in the Moderate Risk category. While not in immediate danger of targeted enforcement, there are areas for improvement. Common issues at this level include inconsistent driver qualification file maintenance, lapsed vehicle inspection schedules, or minor CSA BASIC score creep.

Louisiana Trucking Compliance — JEFFERSON Area Carriers

Motor carriers operating in Louisiana must comply with both federal FMCSA regulations and state-specific transportation requirements. The JEFFERSON, LA corridor is monitored by FMCSA field offices and state highway patrol units conducting roadside inspections. Carriers based in JEFFERSON should ensure driver qualification files, vehicle inspection reports, and hours-of-service records are current and audit-ready at all times.

SHEET METAL SUPPLY LLC falls under the Western Service Center for FMCSA field-office oversight (region code 06). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

FileFlo helps Louisiana trucking companies automate compliance document tracking across 600+ document types, including CDL medical cards, annual vehicle inspections, drug & alcohol testing records, and driver training certifications.

Authority Type, Hazmat Status, and Operating Profile

SHEET METAL SUPPLY LLC is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property — meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

SHEET METAL SUPPLY LLC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 4 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 200,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator — drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

The carrier reports 4 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 2 crash events involving SHEET METAL SUPPLY LLC in the available reporting window. Of these, 0 involved a fatality, 2 involved a reported injury, and 2 resulted in a tow-away. 2 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Federal-recordable crashes feed the Crash Indicator BASIC in CSA — carriers above the intervention threshold are 7–10x more likely to be selected for a compliance review than peer carriers below the threshold. Insurance carriers also pull federal-recordable crash counts during quoting; a single recordable crash in a 24-month look-back can drive a 10-20% premium increase for owner-operators and small fleets.

Most recent recorded event: LA-928, 300, LA on 20170928.

Run a Free FMCSA Audit on SHEET METAL SUPPLY LLC

The free FMCSA audit-readiness score walks through every 49 CFR section a new-entrant audit or compliance review actually checks. Your DOT (957760) prefills automatically; the audit pulls the same Socrata data shown on this page and grades against the rule-pack FileFlo's compliance score actually runs. Three minutes, no signup, no credit card. CFR-cited gap report.

Run the free FMCSA audit for SHEET METAL SUPPLY LLC →

Or skip the audit and start the 5-day FileFlo trial directly: Start Free Trial — $89/mo Starter or $299/mo Professional

Vetting carriers? Earn 15-25% recurring commission

Insurance brokers, freight brokers, and DOT compliance consultants vet hundreds of carriers a month. FileFlo's free carrier intelligence is built for you — and clients who use FileFlo get lower insurance premiums, fewer audit findings, and stronger CSA scores.

See the Partner Program → · 5-min application · Approved within 1 business day · Lifetime commission on every referral

Recent DOT Inspections — SHEET METAL SUPPLY LLC

No recent inspection records found for SHEET METAL SUPPLY LLC (DOT #957760). New carriers or those with limited interstate operations may have fewer recorded inspections.

← Browse All Carriers · Louisiana Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: 2026-06-02T23:06:34.619Z. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #957760 →