Your truck was put out of service on your latest roadside inspection: Iowa on October 19.
That makes 2 of your 50 inspections in the last 24 months with an out-of-service order.
Your MCS-150 lists 261 trucks and 150 drivers.
Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.
NEBRASKA MACHINERY COMPANY LLC is a large fleet motor carrier based in OMAHA, Nebraska (USDOT #68029). As of October 23, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 59/100 (Elevated Risk), based on 50 recent inspection(s) and 28 recorded violation(s) in public FMCSA data.
Free FMCSA Audit · 60 seconds · No signup
Run a CFR-cited gap audit on NEBRASKA MACHINERY COMPANY LLC
Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.
Take the book. Free.
238 pages on the paperwork side of trucking. Every checklist in it, yours.
The complete digital edition · Every checklist and template · Unsubscribe anytime
Free FMCSA record alerts
Is this your company? Get free alerts when this record changes.
FileFlo emails you the morning the public FMCSA record for NEBRASKA MACHINERY COMPANY LLC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.
Turn on free alerts59/100 Elevated Risk
| Category | Score | Max |
|---|---|---|
| Safety Rating | 30 | 30 |
| Inspection Pass Rate | 20 | 20 |
| Out-of-Service Rate (vs FMCSA national avg) | 15 | 15 |
| CSA BASIC percentiles | Not measured | n/a |
Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.
FMCSA's licensing record shows MC666041, motor property common carrier authority, granted on August 7, 2009.
FMCSA served 3 involuntary revocation notices on this authority in the last 24 months, most recently on October 29, 2025, and it was discontinued on November 12, 2025.
A BMC-91X liability filing was cancelled on FMCSA's insurance record in the last 24 months, Addison Insurance Company's, effective October 19, 2025.
When the policy behind a BMC-91X is cancelled, the insurer must give FMCSA 30 days' notice (49 CFR 387.313(d)), and FMCSA starts revoking the operating authority unless a replacement filing is on record.
NEBRASKA MACHINERY COMPANY LLC is a large fleet operating out of OMAHA, Nebraska with USDOT number 68029. The company operates 261 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, NEBRASKA MACHINERY COMPANY LLC has a FileFlo Carrier Intelligence Score (CIS) of 59/100, classified as Elevated Risk.
NEBRASKA MACHINERY COMPANY LLC has undergone 50 recorded DOT inspections. The vehicle out-of-service rate is 2.0%, which is below the national average of 20.72%, suggesting solid vehicle maintenance practices. The driver out-of-service rate is 2%, within acceptable range compared to the 5.51% national average.
The public FMCSA record for NEBRASKA MACHINERY COMPANY LLC carries 28 recorded violations, and the most recent inspection on file is dated October 19, 2026. Across 50 recorded inspections, the record carries 1 driver out-of-service violation and 1 vehicle out-of-service violation.
A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.
The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for NEBRASKA MACHINERY COMPANY LLC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 59 out of 100 falls in FileFlo's Elevated Risk band.
NEBRASKA MACHINERY COMPANY LLC falls under the Midwestern Service Center for FMCSA field-office oversight (region code 07). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.
NEBRASKA MACHINERY COMPANY LLC is classified by FMCSA as an interstate carrier.
The carrier holds an Private Property;Authorized For Hire classification, meaning it transports cargo or passengers for compensation under FMCSA operating authority and is subject to MC-number requirements at 49 CFR Part 365.
Business organization type: Corporation.
NEBRASKA MACHINERY COMPANY LLC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.
Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 150 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.
Self-reported MCS-150 annual mileage: 2,282,307 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.
Owned equipment per the FMCSA Census filing: 17 straight trucks, 1 tractor, 81 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.
The carrier reports 90 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.
Primary cargo type per MCS-150: Machnery Parts. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).
The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 9 crash events involving NEBRASKA MACHINERY COMPANY LLC in the available reporting window. Of these, 0 involved a fatality, 3 involved a reported injury, and 8 resulted in a tow-away. 9 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).
Most recent recorded event: 370TH AVE, Not Reported, NE on December 9, 2025.
Inspections cluster geographically across Nebraska (41), Iowa (2), Kansas (2). The concentration in Nebraska is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams NEBRASKA MACHINERY COMPANY LLC's drivers encounter most often at roadside checkpoints.
Across the 50 recorded inspections, NEBRASKA MACHINERY COMPANY LLC's 2.0% vehicle out-of-service rate sits well below the FMCSA 2024 national average of 20.72%. The 2.0% driver out-of-service rate sits well below the 2024 national average of 5.51%.
Your last out-of-service was 4 days ago.
The self-serve Audit-Ready Setup covers carriers up to 50 power units. A fleet of 261 power units is scoped with a person: tell us how USDOT 68029 is run, how many drivers and files are in scope, and we come back with the scope and the price for that.
Talk to us about NEBRASKA MACHINERY COMPANY LLC
Want the gap list first? Run the free FMCSA audit for NEBRASKA MACHINERY COMPANY LLC: sixty seconds, no signup, every gap cited to the 49 CFR section. See pricing. Read the founder's FMCSA Audit Survival Guide.
Broker or insurance agent? Partner program
Open any inspection for the records an auditor would ask for behind it: free, from USDOT 68029, no signup.
| Date | State | Driver OOS | Vehicle OOS | Next step |
|---|---|---|---|---|
| 2026-10-19 | IA | 0 | 1 | Audit check |
| 2026-10-09 | NE | 0 | 0 | Audit check |
| 2026-10-06 | NE | 0 | 0 | Audit check |
| 2026-09-22 | KS | 0 | 0 | Audit check |
| 2026-09-22 | NE | 0 | 0 | Audit check |
| 2026-09-14 | NE | 0 | 0 | Audit check |
| 2026-09-10 | NE | 0 | 0 | Audit check |
| 2026-09-09 | NE | 0 | 0 | Audit check |
| 2026-08-17 | NE | 0 | 0 | Audit check |
| 2026-08-12 | NE | 0 | 0 | Audit check |
Free · No signup
Run a free FMCSA audit on your fleet
Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.
NEBRASKA MACHINERY COMPANY LLC (USDOT #68029) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 59/100 (Elevated Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.
Per its most recent FMCSA MCS-150 filing, NEBRASKA MACHINERY COMPANY LLC operates 261 power unit(s) and 150 driver(s), classifying it as a large fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.
NEBRASKA MACHINERY COMPANY LLC is registered with the FMCSA at a physical address in OMAHA, Nebraska, under USDOT number 68029.
FileFlo shows 50 recent DOT inspection(s) and 28 recorded violation(s) for NEBRASKA MACHINERY COMPANY LLC (USDOT #68029), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.
NEBRASKA MACHINERY COMPANY LLC scores 59/100 (Elevated Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.
The 49 CFR sections a DOT compliance review actually checks, plain-English:
Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →
← Browse All Carriers · Nebraska Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit
Compare the best FMCSA audit prep software →
Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 23, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile