PRECISION DRILLING SERVICES LLC, DOT #1828980 FMCSA Safety & Compliance Report

MINDEN, Louisiana · DOT #1828980 · 17 trucks · 16 drivers · Safety Rating: Conditional

5 of your 11 roadside inspections in the last 24 months ended with an out-of-service order, most recently Texas on July 6.

Your latest, Louisiana on August 17, was clean.

Your MCS-150 lists 17 trucks and 16 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

PRECISION DRILLING SERVICES LLC is a small fleet motor carrier based in MINDEN, Louisiana (USDOT #1828980). As of October 31, 2026, it holds a Conditional FMCSA safety rating and a FileFlo Carrier Intelligence Score of 38/100 (High Risk), based on 15 recent inspection(s) and 54 recorded violation(s) in public FMCSA data.

What PRECISION DRILLING SERVICES LLC's record points to

Free FMCSA Audit · 60 seconds · No signup

Run a CFR-cited gap audit on PRECISION DRILLING SERVICES LLC

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

I wrote The FMCSA Audit Survival Guide.

Take the book. Free.

238 pages on the paperwork side of trucking. Every checklist in it, yours.

The complete digital edition · Every checklist and template · Unsubscribe anytime

Free FMCSA record alerts

Is this your company? Get free alerts when this record changes.

FileFlo emails you the morning the public FMCSA record for PRECISION DRILLING SERVICES LLC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.

Turn on free alerts

Carrier Intelligence Score

38/100 High Risk

CategoryScoreMax
Safety Rating1030
Inspection Pass Rate1020
Out-of-Service Rate (vs FMCSA national avg)515
CSA BASIC percentilesNot measuredn/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

PRECISION DRILLING SERVICES LLC's public FMCSA record, line by line

Roadside inspections in the last 24 months

  • Aug. 17, 2026, Louisiana. No violations.
  • July 6, 2026, Texas. Out of service: 1 vehicle violation, 2 violations in all. Written up for a tire problem (49 CFR 393.75) and lights not working (49 CFR 393.9).
  • July 5, 2026, Texas. 3 violations, none out of service. Written up for a brake problem (49 CFR 393.45) and lights not working (49 CFR 393.9).
  • June 24, 2026, Missouri. Out of service: 2 vehicle violations. Written up for an equipment problem (49 CFR 393.207).
  • Oct. 29, 2025, Louisiana. No violations.
  • Sept. 19, 2025, Oklahoma. 5 violations, none out of service. Written up for a state or local traffic violation (49 CFR 392.2), wipers not working (49 CFR 393.78), and an oil or grease leak (49 CFR 396.5).

PRECISION DRILLING SERVICES LLC: MINDEN, Louisiana Trucking Company

PRECISION DRILLING SERVICES LLC is a small fleet operating out of MINDEN, Louisiana with USDOT number 1828980. The company operates 17 power units and holds a current FMCSA safety rating of Conditional. Based on our analysis of federal safety data, PRECISION DRILLING SERVICES LLC has a FileFlo Carrier Intelligence Score (CIS) of 38/100, classified as High Risk.

FMCSA Safety Record & Inspection History

PRECISION DRILLING SERVICES LLC has undergone 15 recorded DOT inspections. The vehicle out-of-service rate is 40.0%, which is above the national average of 20.72%. This elevated rate indicates potential maintenance or pre-trip inspection deficiencies that could lead to roadside violations. The driver out-of-service rate is 6.7%, above the national average of 5.51%. Common causes include hours-of-service violations, expired medical certificates, and CDL issues.

Recorded Violations and Out-of-Service Status

The public FMCSA record for PRECISION DRILLING SERVICES LLC carries 54 recorded violations, and the most recent inspection on file is dated August 17, 2026. Across 15 recorded inspections, the record carries 1 driver out-of-service violation and 15 vehicle out-of-service violations.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 38/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for PRECISION DRILLING SERVICES LLC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 38 out of 100 falls in FileFlo's High Risk band.

Authority Type, Hazmat Status, and Operating Profile

PRECISION DRILLING SERVICES LLC is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

PRECISION DRILLING SERVICES LLC is flagged in FMCSA Census as a hazardous materials carrier (HM indicator: Y). Hazmat carriers are subject to additional regulations under 49 CFR Subchapter C, including HM-126 reporting, HM-232 security planning, and the Hazmat Cargo Tank Annual Inspection requirement (49 CFR 180.407). Hazmat violations carry their own, higher penalty schedule, separate from the general FMCSA schedule.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 8 drivers); interstate within 100 miles (short-haul, 8 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 316,128 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 13 tractors, 10 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 8 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Primary cargo type per MCS-150: Mud And Water. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 1 crash event involving PRECISION DRILLING SERVICES LLC in the available reporting window. Of these, 0 involved a fatality, 0 involved a reported injury, and 1 resulted in a tow-away. 1 event meets the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: SR165N, POSEYVILLE, IN on January 12, 2016.

PRECISION DRILLING SERVICES LLC's Inspection Fingerprint: Geographic Pattern and Trend

Inspections cluster geographically across Texas (5), Louisiana (4), Missouri (2). The concentration in Texas is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams PRECISION DRILLING SERVICES LLC's drivers encounter most often at roadside checkpoints.

How PRECISION DRILLING SERVICES LLC Compares to the National Average

Across the 15 recorded inspections, PRECISION DRILLING SERVICES LLC's 40.0% vehicle out-of-service rate sits substantially above the FMCSA 2024 national average of 20.72%. The 6.7% driver out-of-service rate sits moderately above the 2024 national average of 5.51%.

Have PRECISION DRILLING SERVICES LLC's compliance file built for you

Your driver files, kept current by FileFlo's software.

Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.

The Audit-Ready Setup is $499. Send your paperwork and USDOT 1828980; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.

Start the Audit-Ready Setup for PRECISION DRILLING SERVICES LLC →

Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.

Want the gap list first? Run the free FMCSA audit for PRECISION DRILLING SERVICES LLC: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: PRECISION DRILLING SERVICES LLC

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 1828980, no signup.

DateStateDriver OOSVehicle OOSNext step
2026-08-17LA00Audit check
2026-07-06TX01Audit check
2026-07-05TX00Audit check
2026-06-24MO02Audit check
2025-10-29LA00Audit check
2025-09-19OK00Audit check
2025-06-25TN00Audit check
2025-05-13TN13Audit check
2025-01-08TX01Audit check
2025-01-04MO07Audit check

Free · No signup

From the author of The FMCSA Audit Survival Guide. See your carrier's real FMCSA gaps in 60 seconds. Free.

Run a free FMCSA audit on your fleet

Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.

Run free audit

Frequently asked questions about PRECISION DRILLING SERVICES LLC

What is PRECISION DRILLING SERVICES LLC's FMCSA safety rating?

PRECISION DRILLING SERVICES LLC (USDOT #1828980) holds a "Conditional" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 38/100 (High Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.

How large is PRECISION DRILLING SERVICES LLC's fleet?

Per its most recent FMCSA MCS-150 filing, PRECISION DRILLING SERVICES LLC operates 17 power unit(s) and 16 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is PRECISION DRILLING SERVICES LLC based?

PRECISION DRILLING SERVICES LLC is registered with the FMCSA at a physical address in MINDEN, Louisiana, under USDOT number 1828980.

What is PRECISION DRILLING SERVICES LLC's DOT inspection and violation history?

FileFlo shows 15 recent DOT inspection(s) and 54 recorded violation(s) for PRECISION DRILLING SERVICES LLC (USDOT #1828980), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is PRECISION DRILLING SERVICES LLC's FileFlo Carrier Intelligence Score?

PRECISION DRILLING SERVICES LLC scores 38/100 (High Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like PRECISION DRILLING SERVICES LLC is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

Every Louisiana carrier with a recent inspection on file →

← Browse All Carriers · Louisiana Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 31, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #1828980 →