DANIEL BECK WELDING AND CONSTRUCTION LLC, DOT #2496481 FMCSA Safety & Compliance Report

LINDSAY, Oklahoma · DOT #2496481 · 15 trucks · 10 drivers · Safety Rating: Not Rated

Your truck was put out of service on your latest roadside inspection: Texas on March 11.

Your MCS-150 lists 15 trucks and 10 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

DANIEL BECK WELDING AND CONSTRUCTION LLC is a small fleet motor carrier based in LINDSAY, Oklahoma (USDOT #2496481). As of November 5, 2026, it holds a Not Rated FMCSA safety rating and a FileFlo Carrier Intelligence Score of 63/100 (Moderate Risk), based on 2 recent inspection(s) and 5 recorded violation(s) in public FMCSA data.

What DANIEL BECK WELDING AND CONSTRUCTION LLC's record points to

• What out-of-service inspections trigger: the expedited safety audit (49 CFR 385.308)
  Out of service on 1 inspection of 2 in the last 24 months, most recently March 11.
• Have FileFlo run your compliance department
  Driver files, renewals, Clearinghouse queries, MVRs, drug and alcohol testing and the audit packet, run for you.

Carrier Intelligence Score

63/100 Moderate Risk

Category	Score	Max
Safety Rating	22	30
Inspection Pass Rate	10	20
Out-of-Service Rate (vs FMCSA national avg)	9	15
CSA BASIC percentiles	Not measured	n/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

DANIEL BECK WELDING AND CONSTRUCTION LLC's public FMCSA record, line by line

Roadside inspections in the last 24 months

• March 11, 2026, Texas. Out of service: 1 vehicle violation, 2 violations in all. Written up for a driving rule violation (49 CFR 392.9) and a state or local traffic violation (49 CFR 392.2).
• Dec. 26, 2025, Texas. 3 violations, none out of service. Written up for an equipment problem (49 CFR 393.11) and a brake problem (49 CFR 393.45).

DANIEL BECK WELDING AND CONSTRUCTION LLC: LINDSAY, Oklahoma Trucking Company

DANIEL BECK WELDING AND CONSTRUCTION LLC is a small fleet operating out of LINDSAY, Oklahoma with USDOT number 2496481. The company operates 15 power units and has no published FMCSA safety rating (most active carriers are unrated unless they have undergone a compliance review). Based on our analysis of federal safety data, DANIEL BECK WELDING AND CONSTRUCTION LLC has a FileFlo Carrier Intelligence Score (CIS) of 63/100, classified as Moderate Risk.

FMCSA Safety Record & Inspection History

DANIEL BECK WELDING AND CONSTRUCTION LLC has undergone 2 recorded DOT inspections. The vehicle out-of-service rate is 50.0%, which is above the national average of 20.72%. This elevated rate indicates potential maintenance or pre-trip inspection deficiencies that could lead to roadside violations.

Recorded Violations and Out-of-Service Status

The public FMCSA record for DANIEL BECK WELDING AND CONSTRUCTION LLC carries 5 recorded violations, and the most recent inspection on file is dated March 11, 2026. Across 2 recorded inspections, the record carries 0 driver out-of-service violations and 1 vehicle out-of-service violation.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 63/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for DANIEL BECK WELDING AND CONSTRUCTION LLC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 63 out of 100 falls in FileFlo's Moderate Risk band.

Authority Type, Hazmat Status, and Operating Profile

DANIEL BECK WELDING AND CONSTRUCTION LLC is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

DANIEL BECK WELDING AND CONSTRUCTION LLC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 10 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 20,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 12 straight trucks, 3 tractors, 6 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

Primary cargo type per MCS-150: Crane Weights. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

Take DANIEL BECK WELDING AND CONSTRUCTION LLC's compliance work off your plate

The plan for 13 to 15 trucks: $1,500 a month. Start by Dec 31 and it stays $1,500. From Jan 1 it's $1,950. FileFlo takes the driver files, the renewals, the chasing and the audit packet off your plate. FileFlo builds your files at the start, with no separate Setup fee.

• Every driver file built, then kept complete as records come in.
• FileFlo texts and emails your drivers directly about medical cards and CDLs, before they run out.
• MVRs and drug and alcohol tests asked for from your own providers, and chased until the record is on file.
• Annual Clearinghouse queries run for you once you name FileFlo in the Clearinghouse.

Start your compliance department →

Prefer to run it yourself? Software starts at $199 a month.

Want the gap list first? Run the free FMCSA audit for DANIEL BECK WELDING AND CONSTRUCTION LLC: sixty seconds, no signup, every gap cited to the 49 CFR section. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: DANIEL BECK WELDING AND CONSTRUCTION LLC

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 2496481, no signup.

Date	State	Driver OOS	Vehicle OOS	Next step
2026-03-11	TX	0	1	Audit check
2025-12-26	TX	0	0	Audit check

Frequently asked questions about DANIEL BECK WELDING AND CONSTRUCTION LLC

What is DANIEL BECK WELDING AND CONSTRUCTION LLC's FMCSA safety rating?

DANIEL BECK WELDING AND CONSTRUCTION LLC (USDOT #2496481) does not currently carry a published FMCSA safety rating. A "Not Rated" status is common for carriers that have never had a compliance review: it is not a negative finding. FileFlo scores the carrier at 63/100 (Moderate Risk) from the public inspection and out-of-service data that is available.

How large is DANIEL BECK WELDING AND CONSTRUCTION LLC's fleet?

Per its most recent FMCSA MCS-150 filing, DANIEL BECK WELDING AND CONSTRUCTION LLC operates 15 power unit(s) and 10 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is DANIEL BECK WELDING AND CONSTRUCTION LLC based?

DANIEL BECK WELDING AND CONSTRUCTION LLC is registered with the FMCSA at a physical address in LINDSAY, Oklahoma, under USDOT number 2496481.

What is DANIEL BECK WELDING AND CONSTRUCTION LLC's DOT inspection and violation history?

FileFlo shows 2 recent DOT inspection(s) and 5 recorded violation(s) for DANIEL BECK WELDING AND CONSTRUCTION LLC (USDOT #2496481), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is DANIEL BECK WELDING AND CONSTRUCTION LLC's FileFlo Carrier Intelligence Score?

DANIEL BECK WELDING AND CONSTRUCTION LLC scores 63/100 (Moderate Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like DANIEL BECK WELDING AND CONSTRUCTION LLC is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

• 49 CFR 395.8, Hours of service & ELD records
• 49 CFR 391.51, Driver qualification files (DQF)
• 49 CFR 396.3, Vehicle inspection, repair & maintenance
• 49 CFR 382.301, Pre-employment drug & alcohol testing

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

More Oklahoma carriers on file

• SOUTHWEST WATER WORKS LLC, OKLAHOMA CITY (USDOT 2500785)
• TANDEM TRUCKING LLC, OKLAHOMA CITY (USDOT 2503516)
• COOK'S FARMLAND ENTERPRISES LLC, BIXBY (USDOT 2505416)
• BEDLAM OILFIELD SERVICES LLC, DRUMRIGHT (USDOT 2513690)
• MIKE LUMAN TRUCKING AND INVESTMENTS LLC, HOWE (USDOT 2515655)
• O7 ENERGY COMPANY LLC, MARIETTA (USDOT 2521892)

Every Oklahoma carrier with a recent inspection on file →

← Browse All Carriers · Oklahoma Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: November 5, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile