ALLEGHENY IRON & METAL CO, DOT #282772 FMCSA Safety & Compliance Report

PHILADELPHIA, Pennsylvania · DOT #282772 · 19 trucks · 9 drivers · Safety Rating: Satisfactory

2 of your 10 roadside inspections in the last 24 months ended with an out-of-service order, most recently New Jersey on November 6, 2025.

Your latest, Pennsylvania on April 15, had 1 violation, none out of service.

Your MCS-150 lists 19 trucks and 9 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

ALLEGHENY IRON & METAL CO is a small fleet motor carrier based in PHILADELPHIA, Pennsylvania (USDOT #282772). As of October 23, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 86/100 (Low Risk), based on 18 recent inspection(s) and 24 recorded violation(s) in public FMCSA data.

What ALLEGHENY IRON & METAL CO's record points to

Free FMCSA Audit · 60 seconds · No signup

Run a CFR-cited gap audit on ALLEGHENY IRON & METAL CO

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

I wrote The FMCSA Audit Survival Guide.

Take the book. Free.

238 pages on the paperwork side of trucking. Every checklist in it, yours.

The complete digital edition · Every checklist and template · Unsubscribe anytime

Free FMCSA record alerts

Is this your company? Get free alerts when this record changes.

FileFlo emails you the morning the public FMCSA record for ALLEGHENY IRON & METAL CO shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.

Turn on free alerts

Carrier Intelligence Score

86/100 Low Risk

CategoryScoreMax
Safety Rating3030
Inspection Pass Rate1520
Out-of-Service Rate (vs FMCSA national avg)1115
CSA BASIC percentilesNot measuredn/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

ALLEGHENY IRON & METAL CO's public FMCSA record, line by line

Roadside inspections in the last 24 months

  • April 15, 2026, Pennsylvania. 1 violation, none out of service. Written up for a state or local traffic violation (49 CFR 392.2).
  • Jan. 7, 2026, Pennsylvania. 1 violation, none out of service. Written up for a state or local traffic violation (49 CFR 392.2).
  • Nov. 6, 2025, New Jersey. Out of service: 2 vehicle violations. Written up for a tire problem (49 CFR 393.75) and an equipment problem (49 CFR 393.205).
  • May 27, 2025, Pennsylvania. No violations.
  • May 20, 2025, Pennsylvania. No violations.
  • April 28, 2025, Pennsylvania. No violations.

ALLEGHENY IRON & METAL CO: PHILADELPHIA, Pennsylvania Trucking Company

ALLEGHENY IRON & METAL CO is a small fleet operating out of PHILADELPHIA, Pennsylvania with USDOT number 282772. The company operates 19 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, ALLEGHENY IRON & METAL CO has a FileFlo Carrier Intelligence Score (CIS) of 86/100, classified as Low Risk.

FMCSA Safety Record & Inspection History

ALLEGHENY IRON & METAL CO has undergone 18 recorded DOT inspections. The vehicle out-of-service rate is 22.2%, which is above the national average of 20.72%. This elevated rate indicates potential maintenance or pre-trip inspection deficiencies that could lead to roadside violations.

Recorded Violations and Out-of-Service Status

The public FMCSA record for ALLEGHENY IRON & METAL CO carries 24 recorded violations, and the most recent inspection on file is dated April 15, 2026. Across 18 recorded inspections, the record carries 0 driver out-of-service violations and 5 vehicle out-of-service violations.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 86/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for ALLEGHENY IRON & METAL CO: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 86 out of 100 falls in FileFlo's Low Risk band.

Pennsylvania Trucking Compliance: PHILADELPHIA Area Carriers

ALLEGHENY IRON & METAL CO falls under the Eastern Service Center for FMCSA field-office oversight (region code 03). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

ALLEGHENY IRON & METAL CO is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

Business organization type: Corporation.

ALLEGHENY IRON & METAL CO is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.

Operational range per MCS-150 filing: interstate within 100 miles (short-haul, 9 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 438,774 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 10 straight trucks, 9 tractors, 10 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 9 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Primary cargo type per MCS-150: Scrap Iron Metal. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 7 crash events involving ALLEGHENY IRON & METAL CO in the available reporting window. Of these, 0 involved a fatality, 3 involved a reported injury, and 6 resulted in a tow-away. 7 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: I-495 VIETNAM VETS MEM HWY, BELLEFONTE, DE on September 15, 2018.

ALLEGHENY IRON & METAL CO's Inspection Fingerprint: Geographic Pattern and Trend

Inspections cluster geographically across Pennsylvania (15), New Jersey (2), Maryland (1). The concentration in Pennsylvania is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams ALLEGHENY IRON & METAL CO's drivers encounter most often at roadside checkpoints.

How ALLEGHENY IRON & METAL CO Compares to the National Average

Across the 18 recorded inspections, ALLEGHENY IRON & METAL CO's 22.2% vehicle out-of-service rate sits moderately above the FMCSA 2024 national average of 20.72%. The 0.0% driver out-of-service rate sits materially below the 2024 national average of 5.51%.

Have ALLEGHENY IRON & METAL CO's compliance file built for you

The compliance department you never had to hire.

Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.

The Audit-Ready Setup is $499. Send your paperwork and USDOT 282772; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.

Start the Audit-Ready Setup for ALLEGHENY IRON & METAL CO →

Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.

Want the gap list first? Run the free FMCSA audit for ALLEGHENY IRON & METAL CO: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: ALLEGHENY IRON & METAL CO

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 282772, no signup.

DateStateDriver OOSVehicle OOSNext step
2026-04-15PA00Audit check
2026-01-07PA00Audit check
2025-11-06NJ02Audit check
2025-05-27PA00Audit check
2025-05-20PA00Audit check
2025-04-28PA00Audit check
2024-12-26PA00Audit check
2024-12-17PA00Audit check
2024-10-28MD00Audit check
2024-10-24PA01Audit check

Free · No signup

From the author of The FMCSA Audit Survival Guide. See your carrier's real FMCSA gaps in 60 seconds. Free.

Run a free FMCSA audit on your fleet

Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.

Run free audit

Frequently asked questions about ALLEGHENY IRON & METAL CO

What is ALLEGHENY IRON & METAL CO's FMCSA safety rating?

ALLEGHENY IRON & METAL CO (USDOT #282772) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 86/100 (Low Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.

How large is ALLEGHENY IRON & METAL CO's fleet?

Per its most recent FMCSA MCS-150 filing, ALLEGHENY IRON & METAL CO operates 19 power unit(s) and 9 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is ALLEGHENY IRON & METAL CO based?

ALLEGHENY IRON & METAL CO is registered with the FMCSA at a physical address in PHILADELPHIA, Pennsylvania, under USDOT number 282772.

What is ALLEGHENY IRON & METAL CO's DOT inspection and violation history?

FileFlo shows 18 recent DOT inspection(s) and 24 recorded violation(s) for ALLEGHENY IRON & METAL CO (USDOT #282772), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is ALLEGHENY IRON & METAL CO's FileFlo Carrier Intelligence Score?

ALLEGHENY IRON & METAL CO scores 86/100 (Low Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like ALLEGHENY IRON & METAL CO is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

Every Pennsylvania carrier with a recent inspection on file →

← Browse All Carriers · Pennsylvania Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 23, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #282772 →