TITAN MACHINERY INC, DOT #314381 FMCSA Safety & Compliance Report

WEST FARGO, North Dakota · DOT #314381 · 536 trucks · 616 drivers · Safety Rating: Satisfactory

Over 100 trucks: Scoped with the FileFlo compliance team and priced in writing.

Talk to us →

12 of your 50 roadside inspections in the last 24 months ended with an out-of-service order, most recently Minnesota on October 27.

Your latest, North Dakota on November 10, had 1 violation, none out of service.

Your MCS-150 lists 536 trucks and 616 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

TITAN MACHINERY INC is a large fleet motor carrier based in WEST FARGO, North Dakota (USDOT #314381). As of November 16, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 59/100 (Elevated Risk), based on 50 recent inspection(s) and 71 recorded violation(s) in public FMCSA data.

What TITAN MACHINERY INC's record points to

Free FMCSA Audit · 60 seconds · No signup

Run a CFR-cited gap audit on TITAN MACHINERY INC

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

I wrote The FMCSA Audit Survival Guide.

Take the book. Free.

238 pages on the paperwork side of trucking. Every checklist in it, yours.

The complete digital edition · Every checklist and template · Unsubscribe anytime

Free FMCSA record alerts

Is this your company? Get free alerts when this record changes.

FileFlo emails you the morning the public FMCSA record for TITAN MACHINERY INC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.

Turn on free alerts

Carrier Intelligence Score

59/100 Elevated Risk

CategoryScoreMax
Safety Rating3030
Inspection Pass Rate1520
Out-of-Service Rate (vs FMCSA national avg)915
CSA BASIC percentilesNot measuredn/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

TITAN MACHINERY INC's public FMCSA record, line by line

Roadside inspections in the last 24 months

  • Nov. 10, 2026, North Dakota. 1 violation, none out of service. Written up for no proof of the annual truck inspection (49 CFR 396.17).
  • Oct. 29, 2026, Nebraska. No violations.
  • Oct. 27, 2026, Minnesota. Out of service: 1 vehicle violation, 5 violations in all. Written up for a driving rule violation (49 CFR 392.9), a brake problem (49 CFR 393.45), and an equipment problem (49 CFR 393.53).
  • Oct. 23, 2026, Colorado. No violations.
  • Oct. 20, 2026, Kansas. No violations.
  • Oct. 20, 2026, North Dakota. No violations.

TITAN MACHINERY INC: WEST FARGO, North Dakota Trucking Company

TITAN MACHINERY INC is a large fleet operating out of WEST FARGO, North Dakota with USDOT number 314381. The company operates 536 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, TITAN MACHINERY INC has a FileFlo Carrier Intelligence Score (CIS) of 59/100, classified as Elevated Risk.

FMCSA Safety Record & Inspection History

TITAN MACHINERY INC has undergone 50 recorded DOT inspections. The vehicle out-of-service rate is 20.0%, which is below the national average of 20.72%, suggesting solid vehicle maintenance practices. The driver out-of-service rate is 6%, above the national average of 5.51%. Common causes include hours-of-service violations, expired medical certificates, and CDL issues.

Recorded Violations and Out-of-Service Status

The public FMCSA record for TITAN MACHINERY INC carries 71 recorded violations, and the most recent inspection on file is dated November 10, 2026. Across 50 recorded inspections, the record carries 3 driver out-of-service violations and 15 vehicle out-of-service violations.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 59/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for TITAN MACHINERY INC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 59 out of 100 falls in FileFlo's Elevated Risk band.

North Dakota Trucking Compliance: WEST FARGO Area Carriers

TITAN MACHINERY INC falls under the Western Service Center for FMCSA field-office oversight (region code 08). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

TITAN MACHINERY INC is classified by FMCSA as an interstate carrier.

The carrier holds an Private Property;Authorized For Hire classification, meaning it transports cargo or passengers for compensation under FMCSA operating authority and is subject to MC-number requirements at 49 CFR Part 365.

Business organization type: Corporation.

TITAN MACHINERY INC is flagged in FMCSA Census as a hazardous materials carrier (HM indicator: Y). Hazmat carriers are subject to additional regulations under 49 CFR Subchapter C, including HM-126 reporting, HM-232 security planning, and the Hazmat Cargo Tank Annual Inspection requirement (49 CFR 180.407). Hazmat violations carry their own, higher penalty schedule, separate from the general FMCSA schedule.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 616 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 3,504,524 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 453 straight trucks, 83 tractors, 281 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 198 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Primary cargo type per MCS-150: Tools & Equipment. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

TITAN MACHINERY INC's Inspection Fingerprint: Geographic Pattern and Trend

Inspections cluster geographically across Nebraska (12), Minnesota (9), North Dakota (6). The concentration in Nebraska is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams TITAN MACHINERY INC's drivers encounter most often at roadside checkpoints.

How TITAN MACHINERY INC Compares to the National Average

Across the 50 recorded inspections, TITAN MACHINERY INC's 20.0% vehicle out-of-service rate sits slightly below the FMCSA 2024 national average of 20.72%. The 6.0% driver out-of-service rate sits moderately above the 2024 national average of 5.51%.

Have TITAN MACHINERY INC's compliance file scoped for a fleet this size

Your last out-of-service was 20 days ago.

The self-serve Audit-Ready Setup covers carriers up to 50 power units. A fleet of 536 power units is scoped with a person: tell us how USDOT 314381 is run, how many drivers and files are in scope, and we come back with the scope and the price for that.

Talk to us about TITAN MACHINERY INC

Want the gap list first? Run the free FMCSA audit for TITAN MACHINERY INC: sixty seconds, no signup, every gap cited to the 49 CFR section. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: TITAN MACHINERY INC

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 314381, no signup.

DateStateDriver OOSVehicle OOSNext step
2026-11-10ND00Audit check
2026-10-29NE00Audit check
2026-10-27MN01Audit check
2026-10-23CO00Audit check
2026-10-20KS00Audit check
2026-10-20ND00Audit check
2026-10-02CO00Audit check
2026-10-01SD11Audit check
2026-09-25SD00Audit check
2026-09-15WI00Audit check

Free · No signup

From the author of The FMCSA Audit Survival Guide. See your carrier's real FMCSA gaps in 60 seconds. Free.

Run a free FMCSA audit on your fleet

Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.

Run free audit

Frequently asked questions about TITAN MACHINERY INC

What is TITAN MACHINERY INC's FMCSA safety rating?

TITAN MACHINERY INC (USDOT #314381) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 59/100 (Elevated Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.

How large is TITAN MACHINERY INC's fleet?

Per its most recent FMCSA MCS-150 filing, TITAN MACHINERY INC operates 536 power unit(s) and 616 driver(s), classifying it as a large fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is TITAN MACHINERY INC based?

TITAN MACHINERY INC is registered with the FMCSA at a physical address in WEST FARGO, North Dakota, under USDOT number 314381.

What is TITAN MACHINERY INC's DOT inspection and violation history?

FileFlo shows 50 recent DOT inspection(s) and 71 recorded violation(s) for TITAN MACHINERY INC (USDOT #314381), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is TITAN MACHINERY INC's FileFlo Carrier Intelligence Score?

TITAN MACHINERY INC scores 59/100 (Elevated Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like TITAN MACHINERY INC is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

← Browse All Carriers · North Dakota Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: November 16, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #314381 →