C & T DESIGN AND EQUIPMENT COMPANY INC, DOT #334801 FMCSA Safety & Compliance Report

INDIANAPOLIS, Indiana · DOT #334801 · 9 trucks · 12 drivers · Safety Rating: Satisfactory

1 of your 6 roadside inspections in the last 24 months ended with an out-of-service order, most recently Indiana on September 9, 2025.

Your latest, Kentucky on July 9, had 2 violations, none out of service.

Your MCS-150 lists 9 trucks and 12 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

C & T DESIGN AND EQUIPMENT COMPANY INC is a small fleet motor carrier based in INDIANAPOLIS, Indiana (USDOT #334801). As of October 25, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 83/100 (Low Risk), based on 8 recent inspection(s) and 14 recorded violation(s) in public FMCSA data.

What C & T DESIGN AND EQUIPMENT COMPANY INC's record points to

Free FMCSA Audit · 60 seconds · No signup

Run a CFR-cited gap audit on C & T DESIGN AND EQUIPMENT COMPANY INC

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

I wrote The FMCSA Audit Survival Guide.

Take the book. Free.

238 pages on the paperwork side of trucking. Every checklist in it, yours.

The complete digital edition · Every checklist and template · Unsubscribe anytime

Free FMCSA record alerts

Is this your company? Get free alerts when this record changes.

FileFlo emails you the morning the public FMCSA record for C & T DESIGN AND EQUIPMENT COMPANY INC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.

Turn on free alerts

Carrier Intelligence Score

83/100 Low Risk

CategoryScoreMax
Safety Rating3030
Inspection Pass Rate1520
Out-of-Service Rate (vs FMCSA national avg)915
CSA BASIC percentilesNot measuredn/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

C & T DESIGN AND EQUIPMENT COMPANY INC's public FMCSA record, line by line

Roadside inspections in the last 24 months

  • July 9, 2026, Kentucky. 2 violations, none out of service. Written up for company name or USDOT number not shown on the truck (49 CFR 390.21).
  • Nov. 3, 2025, Kentucky. No violations.
  • Sept. 9, 2025, Indiana. Out of service: 2 driver violations, 3 violations in all. Written up for no logbook kept the required way (49 CFR 395.8), no valid medical card (49 CFR 391.41), and a state or local traffic violation (49 CFR 392.2).
  • July 28, 2025, Kentucky. 2 violations, none out of service. Written up for company name or USDOT number not shown on the truck (49 CFR 390.21).
  • June 18, 2025, Indiana. 4 violations, none out of service. Written up for company name or USDOT number not shown on the truck (49 CFR 390.21), no proof of the annual truck inspection (49 CFR 396.17), no valid medical card (49 CFR 391.41), and speeding (49 CFR 392.2).
  • June 18, 2025, Kentucky. No violations.

C & T DESIGN AND EQUIPMENT COMPANY INC: INDIANAPOLIS, Indiana Trucking Company

C & T DESIGN AND EQUIPMENT COMPANY INC is a small fleet operating out of INDIANAPOLIS, Indiana with USDOT number 334801. The company operates 9 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, C & T DESIGN AND EQUIPMENT COMPANY INC has a FileFlo Carrier Intelligence Score (CIS) of 83/100, classified as Low Risk.

FMCSA Safety Record & Inspection History

C & T DESIGN AND EQUIPMENT COMPANY INC has undergone 8 recorded DOT inspections. The driver out-of-service rate is 12.5%, above the national average of 5.51%. Common causes include hours-of-service violations, expired medical certificates, and CDL issues.

Recorded Violations and Out-of-Service Status

The public FMCSA record for C & T DESIGN AND EQUIPMENT COMPANY INC carries 14 recorded violations, and the most recent inspection on file is dated July 9, 2026. Across 8 recorded inspections, the record carries 2 driver out-of-service violations and 0 vehicle out-of-service violations.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 83/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for C & T DESIGN AND EQUIPMENT COMPANY INC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 83 out of 100 falls in FileFlo's Low Risk band.

Indiana Trucking Compliance: INDIANAPOLIS Area Carriers

C & T DESIGN AND EQUIPMENT COMPANY INC falls under the Midwestern Service Center for FMCSA field-office oversight (region code 05). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

C & T DESIGN AND EQUIPMENT COMPANY INC is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

Business organization type: Corporation.

C & T DESIGN AND EQUIPMENT COMPANY INC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 12 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 90,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 4 straight trucks. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

Primary cargo type per MCS-150: Restaurant Equipment. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 1 crash event involving C & T DESIGN AND EQUIPMENT COMPANY INC in the available reporting window. Of these, 0 involved a fatality, 1 involved a reported injury, and 1 resulted in a tow-away. 1 event meets the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: I465 WB, INDIANAPOLIS, IN on September 19, 2024.

C & T DESIGN AND EQUIPMENT COMPANY INC's Inspection Fingerprint: Geographic Pattern and Trend

Inspections cluster geographically across Kentucky (5), Indiana (3). The concentration in Kentucky is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams C & T DESIGN AND EQUIPMENT COMPANY INC's drivers encounter most often at roadside checkpoints.

How C & T DESIGN AND EQUIPMENT COMPANY INC Compares to the National Average

Across the 8 recorded inspections, C & T DESIGN AND EQUIPMENT COMPANY INC's 0.0% vehicle out-of-service rate sits materially below the FMCSA 2024 national average of 20.72%. The 12.5% driver out-of-service rate sits substantially above the 2024 national average of 5.51%.

Have C & T DESIGN AND EQUIPMENT COMPANY INC's compliance file built for you

The compliance department you never had to hire.

Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.

The Audit-Ready Setup is $499. Send your paperwork and USDOT 334801; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.

Start the Audit-Ready Setup for C & T DESIGN AND EQUIPMENT COMPANY INC →

Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.

Want the gap list first? Run the free FMCSA audit for C & T DESIGN AND EQUIPMENT COMPANY INC: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: C & T DESIGN AND EQUIPMENT COMPANY INC

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 334801, no signup.

DateStateDriver OOSVehicle OOSNext step
2026-07-09KY00Audit check
2025-11-03KY00Audit check
2025-09-09IN20Audit check
2025-07-28KY00Audit check
2025-06-18IN00Audit check
2025-06-18KY00Audit check
2024-06-24IN00Audit check
2024-06-21KY00Audit check

Free · No signup

From the author of The FMCSA Audit Survival Guide. See your carrier's real FMCSA gaps in 60 seconds. Free.

Run a free FMCSA audit on your fleet

Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.

Run free audit

Frequently asked questions about C & T DESIGN AND EQUIPMENT COMPANY INC

What is C & T DESIGN AND EQUIPMENT COMPANY INC's FMCSA safety rating?

C & T DESIGN AND EQUIPMENT COMPANY INC (USDOT #334801) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 83/100 (Low Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.

How large is C & T DESIGN AND EQUIPMENT COMPANY INC's fleet?

Per its most recent FMCSA MCS-150 filing, C & T DESIGN AND EQUIPMENT COMPANY INC operates 9 power unit(s) and 12 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is C & T DESIGN AND EQUIPMENT COMPANY INC based?

C & T DESIGN AND EQUIPMENT COMPANY INC is registered with the FMCSA at a physical address in INDIANAPOLIS, Indiana, under USDOT number 334801.

What is C & T DESIGN AND EQUIPMENT COMPANY INC's DOT inspection and violation history?

FileFlo shows 8 recent DOT inspection(s) and 14 recorded violation(s) for C & T DESIGN AND EQUIPMENT COMPANY INC (USDOT #334801), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is C & T DESIGN AND EQUIPMENT COMPANY INC's FileFlo Carrier Intelligence Score?

C & T DESIGN AND EQUIPMENT COMPANY INC scores 83/100 (Low Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like C & T DESIGN AND EQUIPMENT COMPANY INC is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

Every Indiana carrier with a recent inspection on file →

← Browse All Carriers · Indiana Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 25, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #334801 →