KIRKLAND WELDING SUPPLIES INC, DOT #355294 FMCSA Safety & Compliance Report
Under 8 trucks: $499 today, then $199 a month after 30 days unless you cancel.
Start the Audit-Ready Setup for KIRKLAND WELDING SUPPLIES INC →
Your latest roadside inspection, Missouri on April 13, was clean: no violations.
3 inspections on your record in the last 24 months, 1 with violations and none out of service.
Your MCS-150 lists 6 trucks and 5 drivers.
Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.
KIRKLAND WELDING SUPPLIES INC is a small fleet motor carrier based in PITTSBURG, Kansas (USDOT #355294). As of November 5, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 100/100 (Low Risk), based on 4 recent inspection(s) and 5 recorded violation(s) in public FMCSA data.
What KIRKLAND WELDING SUPPLIES INC's record points to
- Have FileFlo run your compliance department
Driver files, renewals, Clearinghouse queries, MVRs, drug and alcohol testing and the audit packet, run for you.
Free FMCSA Audit · 60 seconds · No signup
Run a CFR-cited gap audit on KIRKLAND WELDING SUPPLIES INC
Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.
Take the book. Free.
238 pages on the paperwork side of trucking. Every checklist in it, yours.
The complete digital edition · Every checklist and template · Unsubscribe anytime
Free FMCSA record alerts
Is this your company? Get free alerts when this record changes.
FileFlo emails you the morning the public FMCSA record for KIRKLAND WELDING SUPPLIES INC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.
Turn on free alertsCarrier Intelligence Score
100/100 Low Risk
| Category | Score | Max |
|---|---|---|
| Safety Rating | 30 | 30 |
| Inspection Pass Rate | 20 | 20 |
| Out-of-Service Rate (vs FMCSA national avg) | 15 | 15 |
| CSA BASIC percentiles | Not measured | n/a |
Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.
KIRKLAND WELDING SUPPLIES INC's public FMCSA record, line by line
Roadside inspections in the last 24 months
- April 13, 2026, Missouri. No violations.
- April 9, 2026, Kansas. No violations.
- Dec. 26, 2024, Missouri. 2 violations, none out of service. Written up for non-bulk package not labeled as required. (49 CFR 172.400) and shipper HM shipping paper does not list ID number as required. (49 CFR 172.202).
KIRKLAND WELDING SUPPLIES INC: PITTSBURG, Kansas Trucking Company
KIRKLAND WELDING SUPPLIES INC is a small fleet operating out of PITTSBURG, Kansas with USDOT number 355294. The company operates 6 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, KIRKLAND WELDING SUPPLIES INC has a FileFlo Carrier Intelligence Score (CIS) of 100/100, classified as Low Risk.
FMCSA Safety Record & Inspection History
KIRKLAND WELDING SUPPLIES INC has undergone 4 recorded DOT inspections.
Recorded Violations and Out-of-Service Status
The public FMCSA record for KIRKLAND WELDING SUPPLIES INC carries 5 recorded violations, and the most recent inspection on file is dated April 13, 2026. Across 4 recorded inspections, the record carries 0 driver out-of-service violations and 0 vehicle out-of-service violations.
A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.
What a 100/100 Carrier Intelligence Score Means
The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for KIRKLAND WELDING SUPPLIES INC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 100 out of 100 falls in FileFlo's Low Risk band.
Kansas Trucking Compliance: PITTSBURG Area Carriers
KIRKLAND WELDING SUPPLIES INC falls under the Midwestern Service Center for FMCSA field-office oversight (region code 07). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.
Authority Type, Hazmat Status, and Operating Profile
KIRKLAND WELDING SUPPLIES INC is classified by FMCSA as an interstate carrier.
The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.
Business organization type: Corporation.
KIRKLAND WELDING SUPPLIES INC is flagged in FMCSA Census as a hazardous materials carrier (HM indicator: Y). Hazmat carriers are subject to additional regulations under 49 CFR Subchapter C, including HM-126 reporting, HM-232 security planning, and the Hazmat Cargo Tank Annual Inspection requirement (49 CFR 180.407). Hazmat violations carry their own, higher penalty schedule, separate from the general FMCSA schedule.
Operational range per MCS-150 filing: interstate within 100 miles (short-haul, 3 drivers); intrastate within 100 miles (2 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.
Self-reported MCS-150 annual mileage: 48,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.
Fleet Composition and Driver Profile
Owned equipment per the FMCSA Census filing: 6 straight trucks. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.
The carrier reports 5 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.
Intrastate driver count: 2. Intrastate drivers may be subject to state-specific CDL endorsement and hours-of-service variances depending on the state.
Primary cargo type per MCS-150: Welding Rod & Wire. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).
FMCSA Crash History
The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 1 crash event involving KIRKLAND WELDING SUPPLIES INC in the available reporting window. Of these, 0 involved a fatality, 0 involved a reported injury, and 1 resulted in a tow-away. 1 event meets the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).
Most recent recorded event: K126, KS on June 16, 2021.
How KIRKLAND WELDING SUPPLIES INC Compares to the National Average
Across the 4 recorded inspections, KIRKLAND WELDING SUPPLIES INC's 0.0% vehicle out-of-service rate sits materially below the FMCSA 2024 national average of 20.72%. The 0.0% driver out-of-service rate sits materially below the 2024 national average of 5.51%.
Have KIRKLAND WELDING SUPPLIES INC's compliance file built for you
Your driver files, kept current by FileFlo's software.
Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.
The Audit-Ready Setup is $499. Send your paperwork and USDOT 355294; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.
- A full gap report inside 24 hours, with the regulation behind every line
- Driver qualification files, vehicle files, and the audit packet in FMCSA review format
- The Radar on USDOT 355294: one email the day the public record changes
- The guarantee above, printed word for word on the price card
Start the Audit-Ready Setup for KIRKLAND WELDING SUPPLIES INC →
FileFlo
FileFloQuestions: sales@getfileflo.com
See the work: a sample audit packet · how FileFlo handles your data
Want the gap list first? Run the free FMCSA audit for KIRKLAND WELDING SUPPLIES INC: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.
Broker or insurance agent? Partner program
Recent DOT Inspections: KIRKLAND WELDING SUPPLIES INC
Open any inspection for the records an auditor would ask for behind it: free, from USDOT 355294, no signup.
| Date | State | Driver OOS | Vehicle OOS | Next step |
|---|---|---|---|---|
| 2026-04-13 | MO | 0 | 0 | Audit check |
| 2026-04-09 | KS | 0 | 0 | Audit check |
| 2024-12-26 | MO | 0 | 0 | Audit check |
| 2024-06-12 | MO | 0 | 0 | Audit check |
Free · No signup
Run a free FMCSA audit on your fleet
Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.
Frequently asked questions about KIRKLAND WELDING SUPPLIES INC
What is KIRKLAND WELDING SUPPLIES INC's FMCSA safety rating?
KIRKLAND WELDING SUPPLIES INC (USDOT #355294) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 100/100 (Low Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.
How large is KIRKLAND WELDING SUPPLIES INC's fleet?
Per its most recent FMCSA MCS-150 filing, KIRKLAND WELDING SUPPLIES INC operates 6 power unit(s) and 5 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.
Where is KIRKLAND WELDING SUPPLIES INC based?
KIRKLAND WELDING SUPPLIES INC is registered with the FMCSA at a physical address in PITTSBURG, Kansas, under USDOT number 355294.
What is KIRKLAND WELDING SUPPLIES INC's DOT inspection and violation history?
FileFlo shows 4 recent DOT inspection(s) and 5 recorded violation(s) for KIRKLAND WELDING SUPPLIES INC (USDOT #355294), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.
What is KIRKLAND WELDING SUPPLIES INC's FileFlo Carrier Intelligence Score?
KIRKLAND WELDING SUPPLIES INC scores 100/100 (Low Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.
Federal rules a carrier like KIRKLAND WELDING SUPPLIES INC is audited against
The 49 CFR sections a DOT compliance review actually checks, plain-English:
- 49 CFR 395.8, Hours of service & ELD records
- 49 CFR 391.51, Driver qualification files (DQF)
- 49 CFR 396.3, Vehicle inspection, repair & maintenance
- 49 CFR 382.301, Pre-employment drug & alcohol testing
Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →
More Kansas carriers on file
- F & H INSULATION SALES & SERVICES INC, KECHI (USDOT 360311)
- RUN-R-WAY EXPRESS CO INC, PORTIS (USDOT 361372)
- TRADITIONAL TRUCKING CORPORATION, BELVUE (USDOT 361481)
- AUGIE'S REPAIR & TOWING LLC, HAYS (USDOT 361498)
- TEAGUE ELECTRIC CONSTRUCTION LLC, LENEXA (USDOT 364541)
- BLACK AND WINSOR INC, GODDARD (USDOT 364556)
← Browse All Carriers · Kansas Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit
Compare the best FMCSA audit prep software →
Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: November 5, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile