D & M INDUSTRIES, DOT #451528 FMCSA Safety & Compliance Report

MOORHEAD, Minnesota · DOT #451528 · 23 trucks · 17 drivers · Safety Rating: Not Rated

Your truck was put out of service on your latest roadside inspection: North Dakota on July 21.

Your MCS-150 lists 23 trucks and 17 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

D & M INDUSTRIES is a mid-size fleet motor carrier based in MOORHEAD, Minnesota (USDOT #451528). As of November 5, 2026, it holds a Not Rated FMCSA safety rating and a FileFlo Carrier Intelligence Score of 88/100 (Low Risk), based on 16 recent inspection(s) and 13 recorded violation(s) in public FMCSA data.

What D & M INDUSTRIES's record points to

• What out-of-service inspections trigger: the expedited safety audit (49 CFR 385.308)
  Out of service on 1 inspection of 9 in the last 24 months, most recently July 21.
• Have FileFlo run your compliance department
  Driver files, renewals, Clearinghouse queries, MVRs, drug and alcohol testing and the audit packet, run for you.

Carrier Intelligence Score

88/100 Low Risk

Category	Score	Max
Safety Rating	22	30
Inspection Pass Rate	20	20
Out-of-Service Rate (vs FMCSA national avg)	15	15
CSA BASIC percentiles	Not measured	n/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

D & M INDUSTRIES's public FMCSA record, line by line

Roadside inspections in the last 24 months

• July 21, 2026, North Dakota. Out of service: 1 vehicle violation. Written up for a brake problem (49 CFR 393.45).
• July 2, 2026, Minnesota. 3 violations, none out of service. Written up for a state or local traffic violation (49 CFR 392.2), an equipment problem (49 CFR 393.100), and an electronic logging device (ELD) problem (49 CFR 395.24).
• May 14, 2026, Minnesota. 1 violation, none out of service. Written up for a brake problem (49 CFR 393.45).
• Nov. 13, 2025, North Dakota. No violations.
• Nov. 13, 2025, North Dakota. 1 violation, none out of service. Written up for a brake problem (49 CFR 393.45).
• Nov. 5, 2025, South Dakota. No violations.

D & M INDUSTRIES: MOORHEAD, Minnesota Trucking Company

D & M INDUSTRIES is a mid-size fleet operating out of MOORHEAD, Minnesota with USDOT number 451528. The company operates 23 power units and has no published FMCSA safety rating (most active carriers are unrated unless they have undergone a compliance review). Based on our analysis of federal safety data, D & M INDUSTRIES has a FileFlo Carrier Intelligence Score (CIS) of 88/100, classified as Low Risk.

FMCSA Safety Record & Inspection History

D & M INDUSTRIES has undergone 16 recorded DOT inspections. The vehicle out-of-service rate is 6.3%, which is below the national average of 20.72%, suggesting solid vehicle maintenance practices.

Recorded Violations and Out-of-Service Status

The public FMCSA record for D & M INDUSTRIES carries 13 recorded violations, and the most recent inspection on file is dated July 21, 2026. Across 16 recorded inspections, the record carries 0 driver out-of-service violations and 1 vehicle out-of-service violation.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 88/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for D & M INDUSTRIES: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 88 out of 100 falls in FileFlo's Low Risk band.

Minnesota Trucking Compliance: MOORHEAD Area Carriers

D & M INDUSTRIES falls under the Western Service Center for FMCSA field-office oversight (region code 08). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

D & M INDUSTRIES is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

Business organization type: Corporation.

D & M INDUSTRIES is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 10 drivers); intrastate within 100 miles (7 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 650,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 18 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 2 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Intrastate driver count: 7. Intrastate drivers may be subject to state-specific CDL endorsement and hours-of-service variances depending on the state.

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 3 crash events involving D & M INDUSTRIES in the available reporting window. Of these, 0 involved a fatality, 2 involved a reported injury, and 2 resulted in a tow-away. 3 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: HARLAN ST AT W 13TH AVE, LAKEWOOD, CO on February 11, 2020.

D & M INDUSTRIES's Inspection Fingerprint: Geographic Pattern and Trend

Inspections cluster geographically across Minnesota (9), North Dakota (6), South Dakota (1). The concentration in Minnesota is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams D & M INDUSTRIES's drivers encounter most often at roadside checkpoints.

How D & M INDUSTRIES Compares to the National Average

Across the 16 recorded inspections, D & M INDUSTRIES's 6.3% vehicle out-of-service rate sits well below the FMCSA 2024 national average of 20.72%. The 0.0% driver out-of-service rate sits materially below the 2024 national average of 5.51%.

Take D & M INDUSTRIES's compliance work off your plate

The plan for 16 to 25 trucks: $2,400 a month. Start by Dec 31 and it stays $2,400. From Jan 1 it's $2,950. FileFlo takes the driver files, the renewals, the chasing and the audit packet off your plate. FileFlo builds your files at the start, with no separate Setup fee.

• Every driver file built, then kept complete as records come in.
• FileFlo texts and emails your drivers directly about medical cards and CDLs, before they run out.
• MVRs and drug and alcohol tests asked for from your own providers, and chased until the record is on file.
• Annual Clearinghouse queries run for you once you name FileFlo in the Clearinghouse.

Start your compliance department →

Prefer to run it yourself? Fleet software is $399 a month.

Want the gap list first? Run the free FMCSA audit for D & M INDUSTRIES: sixty seconds, no signup, every gap cited to the 49 CFR section. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: D & M INDUSTRIES

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 451528, no signup.

Date	State	Driver OOS	Vehicle OOS	Next step
2026-07-21	ND	0	1	Audit check
2026-07-02	MN	0	0	Audit check
2026-05-14	MN	0	0	Audit check
2025-11-13	ND	0	0	Audit check
2025-11-13	ND	0	0	Audit check
2025-11-05	SD	0	0	Audit check
2025-10-02	MN	0	0	Audit check
2025-05-27	MN	0	0	Audit check
2024-11-27	ND	0	0	Audit check
2024-09-12	ND	0	0	Audit check

Frequently asked questions about D & M INDUSTRIES

What is D & M INDUSTRIES's FMCSA safety rating?

D & M INDUSTRIES (USDOT #451528) does not currently carry a published FMCSA safety rating. A "Not Rated" status is common for carriers that have never had a compliance review: it is not a negative finding. FileFlo scores the carrier at 88/100 (Low Risk) from the public inspection and out-of-service data that is available.

How large is D & M INDUSTRIES's fleet?

Per its most recent FMCSA MCS-150 filing, D & M INDUSTRIES operates 23 power unit(s) and 17 driver(s), classifying it as a mid-size fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is D & M INDUSTRIES based?

D & M INDUSTRIES is registered with the FMCSA at a physical address in MOORHEAD, Minnesota, under USDOT number 451528.

What is D & M INDUSTRIES's DOT inspection and violation history?

FileFlo shows 16 recent DOT inspection(s) and 13 recorded violation(s) for D & M INDUSTRIES (USDOT #451528), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is D & M INDUSTRIES's FileFlo Carrier Intelligence Score?

D & M INDUSTRIES scores 88/100 (Low Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like D & M INDUSTRIES is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

• 49 CFR 395.8, Hours of service & ELD records
• 49 CFR 391.51, Driver qualification files (DQF)
• 49 CFR 396.3, Vehicle inspection, repair & maintenance
• 49 CFR 382.301, Pre-employment drug & alcohol testing

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

More Minnesota carriers on file

• ROSE TRUCKING INC, GLENCOE (USDOT 451550)
• NORTHWOODS SODDING CO INC, HERMANTOWN (USDOT 452189)
• ANDERSON CONTRACTING INC, SOLWAY (USDOT 454507)
• R L LARSON EXCAVATING INC, SAINT CLOUD (USDOT 454508)
• K NELSON EQUIPMENT LLC, GLYNDON (USDOT 456745)
• VALLEY TRANSPORTATION SERVICE INC, GRAND MEADOW (USDOT 456821)

Every Minnesota carrier with a recent inspection on file →

← Browse All Carriers · Minnesota Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: November 5, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile