GLENN MACHINE WORKS INC, DOT #538919 FMCSA Safety & Compliance Report
1 of your 13 roadside inspections in the last 24 months ended with an out-of-service order, most recently Louisiana on July 8.
Your latest, Mississippi on October 2, had 1 violation, none out of service.
Your MCS-150 lists 40 trucks and 150 drivers.
Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.
GLENN MACHINE WORKS INC is a mid-size fleet motor carrier based in COLUMBUS, Mississippi (USDOT #538919). As of October 26, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 86/100 (Low Risk), based on 19 recent inspection(s) and 25 recorded violation(s) in public FMCSA data.
What GLENN MACHINE WORKS INC's record points to
- What out-of-service inspections trigger: the expedited safety audit (49 CFR 385.308)
Out of service on 1 inspection of 13 in the last 24 months, most recently July 8. - Have FileFlo run your compliance department
Driver files, renewals, Clearinghouse queries, MVRs, drug and alcohol testing and the audit packet, run for you.
Free FMCSA Audit · 60 seconds · No signup
Run a CFR-cited gap audit on GLENN MACHINE WORKS INC
Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.
Take the book. Free.
238 pages on the paperwork side of trucking. Every checklist in it, yours.
The complete digital edition · Every checklist and template · Unsubscribe anytime
Free FMCSA record alerts
Is this your company? Get free alerts when this record changes.
FileFlo emails you the morning the public FMCSA record for GLENN MACHINE WORKS INC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.
Turn on free alertsCarrier Intelligence Score
86/100 Low Risk
| Category | Score | Max |
|---|---|---|
| Safety Rating | 30 | 30 |
| Inspection Pass Rate | 15 | 20 |
| Out-of-Service Rate (vs FMCSA national avg) | 11 | 15 |
| CSA BASIC percentiles | Not measured | n/a |
Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.
GLENN MACHINE WORKS INC's public FMCSA record, line by line
Roadside inspections in the last 24 months
- Oct. 2, 2026, Mississippi. 1 violation, none out of service. Written up for speeding (49 CFR 392.2).
- Oct. 1, 2026, Mississippi. 1 violation, none out of service. Written up for lights not working (49 CFR 393.9).
- Aug. 21, 2026, Mississippi. No violations.
- July 8, 2026, Louisiana. Out of service: 1 vehicle violation, 2 violations in all. Written up for a brake problem (49 CFR 393.43) and an equipment problem (49 CFR 393.60).
- April 25, 2026, Mississippi. No violations.
- April 11, 2026, Mississippi. No violations.
Operating authority and insurance
FMCSA's licensing record shows MC428797, motor property contract carrier authority, granted on June 27, 2002.
GLENN MACHINE WORKS INC: COLUMBUS, Mississippi Trucking Company
GLENN MACHINE WORKS INC is a mid-size fleet operating out of COLUMBUS, Mississippi with USDOT number 538919. The company operates 40 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, GLENN MACHINE WORKS INC has a FileFlo Carrier Intelligence Score (CIS) of 86/100, classified as Low Risk.
FMCSA Safety Record & Inspection History
GLENN MACHINE WORKS INC has undergone 19 recorded DOT inspections. The vehicle out-of-service rate is 10.5%, which is below the national average of 20.72%, suggesting solid vehicle maintenance practices. The driver out-of-service rate is 5.3%, within acceptable range compared to the 5.51% national average.
Recorded Violations and Out-of-Service Status
The public FMCSA record for GLENN MACHINE WORKS INC carries 25 recorded violations, and the most recent inspection on file is dated October 2, 2026. Across 19 recorded inspections, the record carries 1 driver out-of-service violation and 3 vehicle out-of-service violations.
A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.
What a 86/100 Carrier Intelligence Score Means
The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for GLENN MACHINE WORKS INC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 86 out of 100 falls in FileFlo's Low Risk band.
Mississippi Trucking Compliance: COLUMBUS Area Carriers
GLENN MACHINE WORKS INC falls under the Southern Service Center for FMCSA field-office oversight (region code 04). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.
Authority Type, Hazmat Status, and Operating Profile
GLENN MACHINE WORKS INC is classified by FMCSA as an interstate carrier.
The carrier holds an Private Property;Authorized For Hire classification, meaning it transports cargo or passengers for compensation under FMCSA operating authority and is subject to MC-number requirements at 49 CFR Part 365.
Business organization type: Corporation.
GLENN MACHINE WORKS INC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.
Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 150 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.
Self-reported MCS-150 annual mileage: 600,108 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.
Fleet Composition and Driver Profile
Owned equipment per the FMCSA Census filing: 8 straight trucks, 32 tractors. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.
The carrier reports 45 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.
Primary cargo type per MCS-150: Petroleum Fuel Crane Rental. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).
FMCSA Crash History
The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 12 crash events involving GLENN MACHINE WORKS INC in the available reporting window. Of these, 0 involved a fatality, 6 involved a reported injury, and 12 resulted in a tow-away. 12 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).
Most recent recorded event: I-10, RURAL, LA on September 4, 2026.
GLENN MACHINE WORKS INC's Inspection Fingerprint: Geographic Pattern and Trend
Inspections cluster geographically across Louisiana (10), Mississippi (9). The concentration in Louisiana is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams GLENN MACHINE WORKS INC's drivers encounter most often at roadside checkpoints.
How GLENN MACHINE WORKS INC Compares to the National Average
Across the 19 recorded inspections, GLENN MACHINE WORKS INC's 10.5% vehicle out-of-service rate sits slightly below the FMCSA 2024 national average of 20.72%. The 5.3% driver out-of-service rate sits slightly below the 2024 national average of 5.51%.
Have GLENN MACHINE WORKS INC's compliance file built for you
The compliance department you never had to hire.
Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.
The Audit-Ready Setup is $499. Send your paperwork and USDOT 538919; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.
- A full gap report inside 24 hours, with the regulation behind every line
- Driver qualification files, vehicle files, and the audit packet in FMCSA review format
- The Radar on USDOT 538919: one email the day the public record changes
- The guarantee above, printed word for word on the price card
Start the Audit-Ready Setup for GLENN MACHINE WORKS INC →
Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.
FileFlo
FileFloQuestions: sales@getfileflo.com
See the work: a sample audit packet · how FileFlo handles your data
Want the gap list first? Run the free FMCSA audit for GLENN MACHINE WORKS INC: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.
Broker or insurance agent? Partner program
Recent DOT Inspections: GLENN MACHINE WORKS INC
Open any inspection for the records an auditor would ask for behind it: free, from USDOT 538919, no signup.
| Date | State | Driver OOS | Vehicle OOS | Next step |
|---|---|---|---|---|
| 2026-10-02 | MS | 0 | 0 | Audit check |
| 2026-10-01 | MS | 0 | 0 | Audit check |
| 2026-08-21 | MS | 0 | 0 | Audit check |
| 2026-07-08 | LA | 0 | 1 | Audit check |
| 2026-04-25 | MS | 0 | 0 | Audit check |
| 2026-04-11 | MS | 0 | 0 | Audit check |
| 2025-10-13 | LA | 0 | 0 | Audit check |
| 2025-09-12 | MS | 0 | 0 | Audit check |
| 2025-09-06 | LA | 0 | 0 | Audit check |
| 2025-06-10 | LA | 0 | 0 | Audit check |
Free · No signup
Run a free FMCSA audit on your fleet
Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.
Frequently asked questions about GLENN MACHINE WORKS INC
What is GLENN MACHINE WORKS INC's FMCSA safety rating?
GLENN MACHINE WORKS INC (USDOT #538919) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 86/100 (Low Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.
How large is GLENN MACHINE WORKS INC's fleet?
Per its most recent FMCSA MCS-150 filing, GLENN MACHINE WORKS INC operates 40 power unit(s) and 150 driver(s), classifying it as a mid-size fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.
Where is GLENN MACHINE WORKS INC based?
GLENN MACHINE WORKS INC is registered with the FMCSA at a physical address in COLUMBUS, Mississippi, under USDOT number 538919.
What is GLENN MACHINE WORKS INC's DOT inspection and violation history?
FileFlo shows 19 recent DOT inspection(s) and 25 recorded violation(s) for GLENN MACHINE WORKS INC (USDOT #538919), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.
What is GLENN MACHINE WORKS INC's FileFlo Carrier Intelligence Score?
GLENN MACHINE WORKS INC scores 86/100 (Low Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.
Federal rules a carrier like GLENN MACHINE WORKS INC is audited against
The 49 CFR sections a DOT compliance review actually checks, plain-English:
- 49 CFR 395.8, Hours of service & ELD records
- 49 CFR 391.51, Driver qualification files (DQF)
- 49 CFR 396.3, Vehicle inspection, repair & maintenance
- 49 CFR 382.301, Pre-employment drug & alcohol testing
Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →
More Mississippi carriers on file
- HELLUMS TRUCKING CO INC, DENNIS (USDOT 541740)
- T G BAKER TRUCKING INC, WATER VALLEY (USDOT 541757)
- R&B TRUCKING INC, TUPELO (USDOT 541868)
- BELL AND SONS TRUCKING COMPANY INC, ABERDEEN (USDOT 543570)
- SHIVERS TOWING OF MS INC, OXFORD (USDOT 543964)
- MID-SOUTH SIGN COMPANY, COLUMBUS (USDOT 550306)
Every Mississippi carrier with a recent inspection on file →
← Browse All Carriers · Mississippi Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit
Compare the best FMCSA audit prep software →
Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 26, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile