E&E MANUFACTURING OF TENNESSEE LLC, DOT #784595 FMCSA Safety & Compliance Report

PLYMOUTH, Michigan · DOT #784595 · 6 trucks · 7 drivers · Safety Rating: Not Rated

E&E MANUFACTURING OF TENNESSEE LLC is a small fleet motor carrier based in PLYMOUTH, Michigan (USDOT #784595). As of October 22, 2026, it holds a Not Rated FMCSA safety rating and a FileFlo Carrier Intelligence Score of 69/100 (Moderate Risk).

Carrier Intelligence Score

69/100 Moderate Risk

Category	Score	Max
Safety Rating	22	30
Inspection Pass Rate	15	20
Out-of-Service Rate (vs FMCSA national avg)	8	15
CSA BASIC percentiles	Not measured	n/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

E&E MANUFACTURING OF TENNESSEE LLC: PLYMOUTH, Michigan Trucking Company

E&E MANUFACTURING OF TENNESSEE LLC is a small fleet operating out of PLYMOUTH, Michigan with USDOT number 784595. The company operates 6 power units and has no published FMCSA safety rating (most active carriers are unrated unless they have undergone a compliance review). Based on our analysis of federal safety data, E&E MANUFACTURING OF TENNESSEE LLC has a FileFlo Carrier Intelligence Score (CIS) of 69/100, classified as Moderate Risk. This score reflects limited public data: a full roadside-inspection history was not available at page generation, so the inspection and out-of-service components use conservative neutral values.

FMCSA Safety Record & Inspection History

FMCSA records for DOT #784595 could not be read, so this page shows the inspection and violation history as unknown rather than as none.

What a 69/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for E&E MANUFACTURING OF TENNESSEE LLC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 69 out of 100 falls in FileFlo's Moderate Risk band.

Michigan Trucking Compliance: PLYMOUTH Area Carriers

E&E MANUFACTURING OF TENNESSEE LLC falls under the Midwestern Service Center for FMCSA field-office oversight (region code 05). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

E&E MANUFACTURING OF TENNESSEE LLC is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

Business organization type: Corporation.

E&E MANUFACTURING OF TENNESSEE LLC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 7 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 31,500 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 2 straight trucks, 3 tractors, 8 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 7 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Primary cargo type per MCS-150: Auto Parts. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 1 crash event involving E&E MANUFACTURING OF TENNESSEE LLC in the available reporting window. Of these, 0 involved a fatality, 1 involved a reported injury, and 1 resulted in a tow-away. 1 event meets the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: I96, Boston Twp, MI on November 25, 2013.

Have E&E MANUFACTURING OF TENNESSEE LLC's compliance file built for you

The compliance department you never had to hire.

Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.

The Audit-Ready Setup is $499. Send your paperwork and USDOT 784595; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.

• A full gap report inside 24 hours, with the regulation behind every line
• Driver qualification files, vehicle files, and the audit packet in FMCSA review format
• The Radar on USDOT 784595: one email the day the public record changes
• The guarantee above, printed word for word on the price card

Start the Audit-Ready Setup for E&E MANUFACTURING OF TENNESSEE LLC →

Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.

Want the gap list first? Run the free FMCSA audit for E&E MANUFACTURING OF TENNESSEE LLC: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: E&E MANUFACTURING OF TENNESSEE LLC

FMCSA records for DOT #784595 could not be read, so this page shows the inspection and violation history as unknown rather than as none.

Frequently asked questions about E&E MANUFACTURING OF TENNESSEE LLC

What is E&E MANUFACTURING OF TENNESSEE LLC's FMCSA safety rating?

E&E MANUFACTURING OF TENNESSEE LLC (USDOT #784595) does not currently carry a published FMCSA safety rating. A "Not Rated" status is common for carriers that have never had a compliance review: it is not a negative finding. FileFlo scores the carrier at 69/100 (Moderate Risk) from the public inspection and out-of-service data that is available.

How large is E&E MANUFACTURING OF TENNESSEE LLC's fleet?

Per its most recent FMCSA MCS-150 filing, E&E MANUFACTURING OF TENNESSEE LLC operates 6 power unit(s) and 7 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is E&E MANUFACTURING OF TENNESSEE LLC based?

E&E MANUFACTURING OF TENNESSEE LLC is registered with the FMCSA at a physical address in PLYMOUTH, Michigan, under USDOT number 784595.

What is E&E MANUFACTURING OF TENNESSEE LLC's DOT inspection and violation history?

FMCSA records for DOT #784595 could not be read, so this page shows the inspection and violation history as unknown rather than as none.

What is E&E MANUFACTURING OF TENNESSEE LLC's FileFlo Carrier Intelligence Score?

E&E MANUFACTURING OF TENNESSEE LLC scores 69/100 (Moderate Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like E&E MANUFACTURING OF TENNESSEE LLC is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

• 49 CFR 395.8, Hours of service & ELD records
• 49 CFR 391.51, Driver qualification files (DQF)
• 49 CFR 396.3, Vehicle inspection, repair & maintenance
• 49 CFR 382.301, Pre-employment drug & alcohol testing

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

More Michigan carriers on file

• GIELOW LOGISTICS L L C, LEXINGTON (USDOT 785360)
• ACHATZ HANDMADE PIE INC, CHESTERFIELD (USDOT 789398)
• WINGS & WHEELS DELIVERY INC, FLINT (USDOT 790144)
• MICHIGAN AGGREGATE SAND & GRAVEL HAULERS INC, KALKASKA (USDOT 800530)
• BOULEVARD & TRUMBULL TOWING INC, DETROIT (USDOT 803007)
• INONTIME LLC, ZEELAND (USDOT 804734)

Every Michigan carrier with a recent inspection on file →

← Browse All Carriers · Michigan Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 22, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile