VICTOR WELDING SUPPLY CO, DOT #974571 FMCSA Safety & Compliance Report

TULSA, Oklahoma · DOT #974571 · 23 trucks · 12 drivers · Safety Rating: Satisfactory

5 of your 17 roadside inspections in the last 24 months ended with an out-of-service order, most recently Oklahoma on May 28.

Your latest, Oklahoma on October 14, had 1 violation, none out of service.

Your MCS-150 lists 23 trucks and 12 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

VICTOR WELDING SUPPLY CO is a mid-size fleet motor carrier based in TULSA, Oklahoma (USDOT #974571). As of October 23, 2026, it holds a Satisfactory FMCSA safety rating and a FileFlo Carrier Intelligence Score of 72/100 (Moderate Risk), based on 24 recent inspection(s) and 57 recorded violation(s) in public FMCSA data.

What VICTOR WELDING SUPPLY CO's record points to

Free FMCSA Audit · 60 seconds · No signup

Run a CFR-cited gap audit on VICTOR WELDING SUPPLY CO

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

I wrote The FMCSA Audit Survival Guide.

Take the book. Free.

238 pages on the paperwork side of trucking. Every checklist in it, yours.

The complete digital edition · Every checklist and template · Unsubscribe anytime

Free FMCSA record alerts

Is this your company? Get free alerts when this record changes.

FileFlo emails you the morning the public FMCSA record for VICTOR WELDING SUPPLY CO shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.

Turn on free alerts

Carrier Intelligence Score

72/100 Moderate Risk

CategoryScoreMax
Safety Rating3030
Inspection Pass Rate1020
Out-of-Service Rate (vs FMCSA national avg)715
CSA BASIC percentilesNot measuredn/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

VICTOR WELDING SUPPLY CO's public FMCSA record, line by line

Roadside inspections in the last 24 months

  • Oct. 14, 2026, Oklahoma. 1 violation, none out of service. Written up for lights not working (49 CFR 393.95).
  • Aug. 5, 2026, Oklahoma. 1 violation, none out of service. Written up for a driving rule violation (49 CFR 392.82).
  • June 4, 2026, Oklahoma. No violations.
  • May 28, 2026, Oklahoma. Out of service: 4 vehicle violations, 14 violations in all. Written up for a brake problem (49 CFR 393.43), a maintenance violation (49 CFR 396.3), shipper failed to provide HM shipping paper (49 CFR 172.200), and 50% or more of the required ID numbers are missing for each material (49 CFR 177.823).
  • March 4, 2026, Oklahoma. Out of service: 1 vehicle violation, 3 violations in all. Written up for operate a motor vehicle without a required shipping paper. NOTE: An error in the shipping description or an incomplete shipping description (49 CFR 177.817), failing to properly mark cargo tank test dates as required (49 CFR 180.415), and failing to comply with general cargo tank requirements. (49 CFR 173.33).
  • Jan. 21, 2026, Oklahoma. No violations.

VICTOR WELDING SUPPLY CO: TULSA, Oklahoma Trucking Company

VICTOR WELDING SUPPLY CO is a mid-size fleet operating out of TULSA, Oklahoma with USDOT number 974571. The company operates 23 power units and holds a current FMCSA safety rating of Satisfactory. Based on our analysis of federal safety data, VICTOR WELDING SUPPLY CO has a FileFlo Carrier Intelligence Score (CIS) of 72/100, classified as Moderate Risk.

FMCSA Safety Record & Inspection History

VICTOR WELDING SUPPLY CO has undergone 24 recorded DOT inspections. The vehicle out-of-service rate is 33.3%, which is above the national average of 20.72%. This elevated rate indicates potential maintenance or pre-trip inspection deficiencies that could lead to roadside violations. The driver out-of-service rate is 4.2%, within acceptable range compared to the 5.51% national average.

Recorded Violations and Out-of-Service Status

The public FMCSA record for VICTOR WELDING SUPPLY CO carries 57 recorded violations, and the most recent inspection on file is dated October 14, 2026. Across 24 recorded inspections, the record carries 1 driver out-of-service violation and 11 vehicle out-of-service violations.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 72/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for VICTOR WELDING SUPPLY CO: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 72 out of 100 falls in FileFlo's Moderate Risk band.

Oklahoma Trucking Compliance: TULSA Area Carriers

VICTOR WELDING SUPPLY CO falls under the Western Service Center for FMCSA field-office oversight (region code 06). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

VICTOR WELDING SUPPLY CO is classified by FMCSA as an interstate carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

Business organization type: Corporation.

VICTOR WELDING SUPPLY CO is flagged in FMCSA Census as a hazardous materials carrier (HM indicator: Y). Hazmat carriers are subject to additional regulations under 49 CFR Subchapter C, including HM-126 reporting, HM-232 security planning, and the Hazmat Cargo Tank Annual Inspection requirement (49 CFR 180.407). Hazmat violations carry their own, higher penalty schedule, separate from the general FMCSA schedule.

Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 3 drivers); intrastate within 100 miles (9 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 178,049 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 7 straight trucks, 9 tractors. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 11 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Intrastate driver count: 9. Intrastate drivers may be subject to state-specific CDL endorsement and hours-of-service variances depending on the state.

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 7 crash events involving VICTOR WELDING SUPPLY CO in the available reporting window. Of these, 0 involved a fatality, 6 involved a reported injury, and 6 resulted in a tow-away. 7 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: 1 S PEORIA AVE, TULSA, OK on September 8, 2026.

How VICTOR WELDING SUPPLY CO Compares to the National Average

Across the 24 recorded inspections, VICTOR WELDING SUPPLY CO's 33.3% vehicle out-of-service rate sits substantially above the FMCSA 2024 national average of 20.72%. The 4.2% driver out-of-service rate sits slightly below the 2024 national average of 5.51%.

Have VICTOR WELDING SUPPLY CO's compliance file built for you

The compliance department you never had to hire.

Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.

The Audit-Ready Setup is $499. Send your paperwork and USDOT 974571; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.

Start the Audit-Ready Setup for VICTOR WELDING SUPPLY CO →

Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.

Want the gap list first? Run the free FMCSA audit for VICTOR WELDING SUPPLY CO: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: VICTOR WELDING SUPPLY CO

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 974571, no signup.

DateStateDriver OOSVehicle OOSNext step
2026-10-14OK00Audit check
2026-08-05OK00Audit check
2026-06-04OK00Audit check
2026-05-28OK04Audit check
2026-03-04OK01Audit check
2026-01-21OK00Audit check
2025-12-18OK00Audit check
2025-11-06OK01Audit check
2025-10-09OK00Audit check
2025-10-07OK00Audit check

Free · No signup

From the author of The FMCSA Audit Survival Guide. See your carrier's real FMCSA gaps in 60 seconds. Free.

Run a free FMCSA audit on your fleet

Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.

Run free audit

Frequently asked questions about VICTOR WELDING SUPPLY CO

What is VICTOR WELDING SUPPLY CO's FMCSA safety rating?

VICTOR WELDING SUPPLY CO (USDOT #974571) holds a "Satisfactory" FMCSA safety rating. FileFlo's Carrier Intelligence Score for the carrier is 72/100 (Moderate Risk), derived from its safety rating, inspection pass rate, and out-of-service rate versus the FMCSA national average.

How large is VICTOR WELDING SUPPLY CO's fleet?

Per its most recent FMCSA MCS-150 filing, VICTOR WELDING SUPPLY CO operates 23 power unit(s) and 12 driver(s), classifying it as a mid-size fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is VICTOR WELDING SUPPLY CO based?

VICTOR WELDING SUPPLY CO is registered with the FMCSA at a physical address in TULSA, Oklahoma, under USDOT number 974571.

What is VICTOR WELDING SUPPLY CO's DOT inspection and violation history?

FileFlo shows 24 recent DOT inspection(s) and 57 recorded violation(s) for VICTOR WELDING SUPPLY CO (USDOT #974571), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is VICTOR WELDING SUPPLY CO's FileFlo Carrier Intelligence Score?

VICTOR WELDING SUPPLY CO scores 72/100 (Moderate Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like VICTOR WELDING SUPPLY CO is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

Every Oklahoma carrier with a recent inspection on file →

← Browse All Carriers · Oklahoma Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 23, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #974571 →