PHOENIX WELDING SUPPLY CO INC, DOT #1044836 FMCSA Safety & Compliance Report

PHOENIX, Arizona · DOT #1044836 · 19 trucks · 14 drivers · Safety Rating: Not Rated

3 of your 14 roadside inspections in the last 24 months ended with an out-of-service order, most recently Arizona on July 7.

Your latest, Arizona on September 23, was clean.

Your MCS-150 lists 19 trucks and 14 drivers.

Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.

PHOENIX WELDING SUPPLY CO INC is a small fleet motor carrier based in PHOENIX, Arizona (USDOT #1044836). As of October 25, 2026, it holds a Not Rated FMCSA safety rating and a FileFlo Carrier Intelligence Score of 71/100 (Moderate Risk), based on 20 recent inspection(s) and 26 recorded violation(s) in public FMCSA data.

What PHOENIX WELDING SUPPLY CO INC's record points to

Free FMCSA Audit · 60 seconds · No signup

Run a CFR-cited gap audit on PHOENIX WELDING SUPPLY CO INC

Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.

Run free audit →

I wrote The FMCSA Audit Survival Guide.

Take the book. Free.

238 pages on the paperwork side of trucking. Every checklist in it, yours.

The complete digital edition · Every checklist and template · Unsubscribe anytime

Free FMCSA record alerts

Is this your company? Get free alerts when this record changes.

FileFlo emails you the morning the public FMCSA record for PHOENIX WELDING SUPPLY CO INC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.

Turn on free alerts

Carrier Intelligence Score

71/100 Moderate Risk

CategoryScoreMax
Safety Rating2230
Inspection Pass Rate1520
Out-of-Service Rate (vs FMCSA national avg)915
CSA BASIC percentilesNot measuredn/a

Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.

PHOENIX WELDING SUPPLY CO INC's public FMCSA record, line by line

Roadside inspections in the last 24 months

  • Sept. 23, 2026, Arizona. No violations.
  • July 7, 2026, Arizona. Out of service: 2 driver violations, 3 violations in all. Written up for a CDL violation (49 CFR 383.23) and a state or local traffic violation (49 CFR 392.2).
  • June 1, 2026, Arizona. 1 violation, none out of service. Written up for failure to maintain placard(s) in a condition so that the format, legibility, color, and visibility of the placard will not be substantially red (49 CFR 172.516).
  • March 17, 2026, Arizona. No violations.
  • Feb. 20, 2026, Arizona. No violations.
  • Nov. 25, 2025, Arizona. 1 violation, none out of service. Written up for failing to clearly distinguish HM shipping papers from other papers of any kind (49 CFR 177.817).

PHOENIX WELDING SUPPLY CO INC: PHOENIX, Arizona Trucking Company

PHOENIX WELDING SUPPLY CO INC is a small fleet operating out of PHOENIX, Arizona with USDOT number 1044836. The company operates 19 power units and has no published FMCSA safety rating (most active carriers are unrated unless they have undergone a compliance review). Based on our analysis of federal safety data, PHOENIX WELDING SUPPLY CO INC has a FileFlo Carrier Intelligence Score (CIS) of 71/100, classified as Moderate Risk.

FMCSA Safety Record & Inspection History

PHOENIX WELDING SUPPLY CO INC has undergone 20 recorded DOT inspections. The vehicle out-of-service rate is 10.0%, which is below the national average of 20.72%, suggesting solid vehicle maintenance practices. The driver out-of-service rate is 10%, above the national average of 5.51%. Common causes include hours-of-service violations, expired medical certificates, and CDL issues.

Recorded Violations and Out-of-Service Status

The public FMCSA record for PHOENIX WELDING SUPPLY CO INC carries 26 recorded violations, and the most recent inspection on file is dated September 23, 2026. Across 20 recorded inspections, the record carries 3 driver out-of-service violations and 2 vehicle out-of-service violations.

A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.

What a 71/100 Carrier Intelligence Score Means

The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for PHOENIX WELDING SUPPLY CO INC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 71 out of 100 falls in FileFlo's Moderate Risk band.

Arizona Trucking Compliance: PHOENIX Area Carriers

PHOENIX WELDING SUPPLY CO INC falls under the Western Service Center for FMCSA field-office oversight (region code 09). Service-center territory drives which FMCSA Investigator team would conduct a new-entrant audit or compliance review if one is triggered for this carrier.

Authority Type, Hazmat Status, and Operating Profile

PHOENIX WELDING SUPPLY CO INC is classified by FMCSA as an intrastate non-hazmat carrier.

The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.

PHOENIX WELDING SUPPLY CO INC is flagged in FMCSA Census as a hazardous materials carrier (HM indicator: Y). Hazmat carriers are subject to additional regulations under 49 CFR Subchapter C, including HM-126 reporting, HM-232 security planning, and the Hazmat Cargo Tank Annual Inspection requirement (49 CFR 180.407). Hazmat violations carry their own, higher penalty schedule, separate from the general FMCSA schedule.

Operational range per MCS-150 filing: intrastate beyond 100 miles (2 drivers); intrastate within 100 miles (12 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.

Self-reported MCS-150 annual mileage: 150,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.

Fleet Composition and Driver Profile

Owned equipment per the FMCSA Census filing: 11 straight trucks. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.

The carrier reports 14 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.

Intrastate driver count: 14. Intrastate drivers may be subject to state-specific CDL endorsement and hours-of-service variances depending on the state.

Primary cargo type per MCS-150: Cylinders. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).

FMCSA Crash History

The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 3 crash events involving PHOENIX WELDING SUPPLY CO INC in the available reporting window. Of these, 0 involved a fatality, 0 involved a reported injury, and 3 resulted in a tow-away. 3 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).

Most recent recorded event: SR 202 AT MP 31, MESA, AZ on November 24, 2025.

How PHOENIX WELDING SUPPLY CO INC Compares to the National Average

Across the 20 recorded inspections, PHOENIX WELDING SUPPLY CO INC's 10.0% vehicle out-of-service rate sits well below the FMCSA 2024 national average of 20.72%. The 10.0% driver out-of-service rate sits substantially above the 2024 national average of 5.51%.

Have PHOENIX WELDING SUPPLY CO INC's compliance file built for you

The compliance department you never had to hire.

Every driver's file built and kept current, every expiration and renewal date in front of you before it lapses, and the audit packet ready on demand. For 5 trucks or 50.

The Audit-Ready Setup is $499. Send your paperwork and USDOT 1044836; FileFlo files every record against the 49 CFR section that requires it, assembles a driver qualification file per driver, builds the vehicle files, and delivers a gap list with the automatic-failure items first plus your audit packet indexed to the CFR. 30 days, every dollar back: if you are not happy with the Setup within 30 days of purchase, FileFlo refunds the full Setup price. Your first 30 days of FileFlo are included. After your 30 included days, Core continues at $199 a month (Fleet, $399, for 16 to 50 trucks) on the same card unless you cancel. We email you 7 days and 1 day before the first charge, and one click in either email cancels it.

Start the Audit-Ready Setup for PHOENIX WELDING SUPPLY CO INC →

Or have FileFlo run it for you: the FileFlo Compliance Department, $1,500 a month, Setup included.

Want the gap list first? Run the free FMCSA audit for PHOENIX WELDING SUPPLY CO INC: sixty seconds, no signup, every gap cited to the 49 CFR section. Or get your free readiness score. See pricing. Read the founder's FMCSA Audit Survival Guide.

Broker or insurance agent? Partner program

Recent DOT Inspections: PHOENIX WELDING SUPPLY CO INC

Open any inspection for the records an auditor would ask for behind it: free, from USDOT 1044836, no signup.

DateStateDriver OOSVehicle OOSNext step
2026-09-23AZ00Audit check
2026-07-07AZ20Audit check
2026-06-01AZ00Audit check
2026-03-17AZ00Audit check
2026-02-20AZ00Audit check
2025-11-25AZ00Audit check
2025-11-10AZ01Audit check
2025-10-02AZ00Audit check
2025-08-25AZ00Audit check
2025-08-25AZ01Audit check

Free · No signup

From the author of The FMCSA Audit Survival Guide. See your carrier's real FMCSA gaps in 60 seconds. Free.

Run a free FMCSA audit on your fleet

Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.

Run free audit

Frequently asked questions about PHOENIX WELDING SUPPLY CO INC

What is PHOENIX WELDING SUPPLY CO INC's FMCSA safety rating?

PHOENIX WELDING SUPPLY CO INC (USDOT #1044836) does not currently carry a published FMCSA safety rating. A "Not Rated" status is common for carriers that have never had a compliance review: it is not a negative finding. FileFlo scores the carrier at 71/100 (Moderate Risk) from the public inspection and out-of-service data that is available.

How large is PHOENIX WELDING SUPPLY CO INC's fleet?

Per its most recent FMCSA MCS-150 filing, PHOENIX WELDING SUPPLY CO INC operates 19 power unit(s) and 14 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.

Where is PHOENIX WELDING SUPPLY CO INC based?

PHOENIX WELDING SUPPLY CO INC is registered with the FMCSA at a physical address in PHOENIX, Arizona, under USDOT number 1044836.

What is PHOENIX WELDING SUPPLY CO INC's DOT inspection and violation history?

FileFlo shows 20 recent DOT inspection(s) and 26 recorded violation(s) for PHOENIX WELDING SUPPLY CO INC (USDOT #1044836), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.

What is PHOENIX WELDING SUPPLY CO INC's FileFlo Carrier Intelligence Score?

PHOENIX WELDING SUPPLY CO INC scores 71/100 (Moderate Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.

Federal rules a carrier like PHOENIX WELDING SUPPLY CO INC is audited against

The 49 CFR sections a DOT compliance review actually checks, plain-English:

Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →

Every Arizona carrier with a recent inspection on file →

← Browse All Carriers · Arizona Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit

Compare the best FMCSA audit prep software →

Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: October 25, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile

Run free audit on DOT #1044836 →