SOUTHCOAST WELDING & MANUFACTURING LLC, DOT #1770487 FMCSA Safety & Compliance Report
8 to 12 trucks: $900 a month for 3 months, then $1,500.
2 of your 3 roadside inspections in the last 24 months ended with an out-of-service order, most recently California on September 18, 2025.
Your latest, California on April 14, had 8 violations, none out of service.
Your MCS-150 lists 8 trucks and 3 drivers.
Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.
SOUTHCOAST WELDING & MANUFACTURING LLC is a small fleet motor carrier based in CHULA VISTA, California (USDOT #1770487). As of November 4, 2026, it holds a Not Rated FMCSA safety rating and a FileFlo Carrier Intelligence Score of 57/100 (Elevated Risk), based on 4 recent inspection(s) and 19 recorded violation(s) in public FMCSA data.
What SOUTHCOAST WELDING & MANUFACTURING LLC's record points to
- What out-of-service inspections trigger: the expedited safety audit (49 CFR 385.308)
Out of service on 2 inspections of 3 in the last 24 months, most recently September 18, 2025. - Have FileFlo run your compliance department
Driver files, renewals, Clearinghouse queries, MVRs, drug and alcohol testing and the audit packet, run for you.
Free FMCSA Audit · 60 seconds · No signup
Run a CFR-cited gap audit on SOUTHCOAST WELDING & MANUFACTURING LLC
Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.
Take the book. Free.
238 pages on the paperwork side of trucking. Every checklist in it, yours.
The complete digital edition · Every checklist and template · Unsubscribe anytime
Free FMCSA record alerts
Is this your company? Get free alerts when this record changes.
FileFlo emails you the morning the public FMCSA record for SOUTHCOAST WELDING & MANUFACTURING LLC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.
Turn on free alertsCarrier Intelligence Score
57/100 Elevated Risk
| Category | Score | Max |
|---|---|---|
| Safety Rating | 22 | 30 |
| Inspection Pass Rate | 10 | 20 |
| Out-of-Service Rate (vs FMCSA national avg) | 5 | 15 |
| CSA BASIC percentiles | Not measured | n/a |
Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.
SOUTHCOAST WELDING & MANUFACTURING LLC's public FMCSA record, line by line
Roadside inspections in the last 24 months
- April 14, 2026, California. 8 violations, none out of service. Written up for speeding (49 CFR 392.2), company name or USDOT number not shown on the truck (49 CFR 390.21), lights not working (49 CFR 393.9), and an equipment problem (49 CFR 393.207).
- Sept. 18, 2025, California. Out of service: 1 driver violation, 3 violations in all. Written up for no logbook kept the required way (49 CFR 395.8), speeding (49 CFR 392.2), and lights not working (49 CFR 393.9).
- June 10, 2025, California. Out of service: 2 vehicle violations, 7 violations in all. Written up for a tire problem (49 CFR 393.75), a brake problem (49 CFR 393.41), speeding (49 CFR 392.2), and lights not working (49 CFR 393.95).
SOUTHCOAST WELDING & MANUFACTURING LLC: CHULA VISTA, California Trucking Company
SOUTHCOAST WELDING & MANUFACTURING LLC is a small fleet operating out of CHULA VISTA, California with USDOT number 1770487. The company operates 8 power units and has no published FMCSA safety rating (most active carriers are unrated unless they have undergone a compliance review). Based on our analysis of federal safety data, SOUTHCOAST WELDING & MANUFACTURING LLC has a FileFlo Carrier Intelligence Score (CIS) of 57/100, classified as Elevated Risk.
FMCSA Safety Record & Inspection History
SOUTHCOAST WELDING & MANUFACTURING LLC has undergone 4 recorded DOT inspections. The vehicle out-of-service rate is 25.0%, which is above the national average of 20.72%. This elevated rate indicates potential maintenance or pre-trip inspection deficiencies that could lead to roadside violations. The driver out-of-service rate is 25%, above the national average of 5.51%. Common causes include hours-of-service violations, expired medical certificates, and CDL issues.
Recorded Violations and Out-of-Service Status
The public FMCSA record for SOUTHCOAST WELDING & MANUFACTURING LLC carries 19 recorded violations, and the most recent inspection on file is dated April 14, 2026. Across 4 recorded inspections, the record carries 1 driver out-of-service violation and 2 vehicle out-of-service violations.
A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.
What a 57/100 Carrier Intelligence Score Means
The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for SOUTHCOAST WELDING & MANUFACTURING LLC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 57 out of 100 falls in FileFlo's Elevated Risk band.
Authority Type, Hazmat Status, and Operating Profile
SOUTHCOAST WELDING & MANUFACTURING LLC is classified by FMCSA as an interstate carrier.
The carrier is classified as Private Property, meaning it transports its own goods incidental to its primary business, exempt from MC-number authority but still subject to safety regulations under 49 CFR Part 390.
SOUTHCOAST WELDING & MANUFACTURING LLC is not flagged in FMCSA Census as a hazmat carrier (HM indicator: N), so the carrier is not subject to the additional 49 CFR Subchapter C hazmat regulations.
Operational range per MCS-150 filing: interstate within 100 miles (short-haul, 3 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.
Self-reported MCS-150 annual mileage: 11,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.
Fleet Composition and Driver Profile
Owned equipment per the FMCSA Census filing: 4 straight trucks. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.
The carrier reports 2 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.
Primary cargo type per MCS-150: Steel. Cargo type drives which BASIC categories the carrier is monitored under (Hazmat Compliance applies only to HM-flagged carriers; Cargo-Related Crash applies broadly).
How SOUTHCOAST WELDING & MANUFACTURING LLC Compares to the National Average
Across the 4 recorded inspections, SOUTHCOAST WELDING & MANUFACTURING LLC's 25.0% vehicle out-of-service rate sits moderately above the FMCSA 2024 national average of 20.72%. The 25.0% driver out-of-service rate sits substantially above the 2024 national average of 5.51%.
Take SOUTHCOAST WELDING & MANUFACTURING LLC's compliance work off your plate
The plan for 8 to 12 trucks: $900 a month for 3 months, then $1,500. FileFlo takes the driver files, the renewals, the chasing and the audit packet off your plate. FileFlo builds your files at the start, with no separate Setup fee.
- Every driver file built, then kept complete as records come in.
- FileFlo texts and emails your drivers directly about medical cards and CDLs, before they run out.
- MVRs and drug and alcohol tests asked for from your own providers, and chased until the record is on file.
- Annual Clearinghouse queries run for you once you name FileFlo in the Clearinghouse.
Start your compliance department →
Prefer to run it yourself? Software starts at $199 a month.
FileFlo
FileFloQuestions: sales@getfileflo.com
See the work: a sample audit packet · how FileFlo handles your data
Want the gap list first? Run the free FMCSA audit for SOUTHCOAST WELDING & MANUFACTURING LLC: sixty seconds, no signup, every gap cited to the 49 CFR section. See pricing. Read the founder's FMCSA Audit Survival Guide.
Broker or insurance agent? Partner program
Recent DOT Inspections: SOUTHCOAST WELDING & MANUFACTURING LLC
Open any inspection for the records an auditor would ask for behind it: free, from USDOT 1770487, no signup.
| Date | State | Driver OOS | Vehicle OOS | Next step |
|---|---|---|---|---|
| 2026-04-14 | CA | 0 | 0 | Audit check |
| 2025-09-18 | CA | 1 | 0 | Audit check |
| 2025-06-10 | CA | 0 | 2 | Audit check |
| 2023-11-08 | CA | 0 | 0 | Audit check |
Free · No signup
Run a free FMCSA audit on your fleet
Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.
Frequently asked questions about SOUTHCOAST WELDING & MANUFACTURING LLC
What is SOUTHCOAST WELDING & MANUFACTURING LLC's FMCSA safety rating?
SOUTHCOAST WELDING & MANUFACTURING LLC (USDOT #1770487) does not currently carry a published FMCSA safety rating. A "Not Rated" status is common for carriers that have never had a compliance review: it is not a negative finding. FileFlo scores the carrier at 57/100 (Elevated Risk) from the public inspection and out-of-service data that is available.
How large is SOUTHCOAST WELDING & MANUFACTURING LLC's fleet?
Per its most recent FMCSA MCS-150 filing, SOUTHCOAST WELDING & MANUFACTURING LLC operates 8 power unit(s) and 3 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.
Where is SOUTHCOAST WELDING & MANUFACTURING LLC based?
SOUTHCOAST WELDING & MANUFACTURING LLC is registered with the FMCSA at a physical address in CHULA VISTA, California, under USDOT number 1770487.
What is SOUTHCOAST WELDING & MANUFACTURING LLC's DOT inspection and violation history?
FileFlo shows 4 recent DOT inspection(s) and 19 recorded violation(s) for SOUTHCOAST WELDING & MANUFACTURING LLC (USDOT #1770487), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.
What is SOUTHCOAST WELDING & MANUFACTURING LLC's FileFlo Carrier Intelligence Score?
SOUTHCOAST WELDING & MANUFACTURING LLC scores 57/100 (Elevated Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.
Federal rules a carrier like SOUTHCOAST WELDING & MANUFACTURING LLC is audited against
The 49 CFR sections a DOT compliance review actually checks, plain-English:
- 49 CFR 395.8, Hours of service & ELD records
- 49 CFR 391.51, Driver qualification files (DQF)
- 49 CFR 396.3, Vehicle inspection, repair & maintenance
- 49 CFR 382.301, Pre-employment drug & alcohol testing
Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →
More California carriers on file
- AG & SON TRUCKING LLC, ESCONDIDO (USDOT 1770747)
- AVALON GLASS & MIRROR COMPANY, CARSON (USDOT 1770755)
- OAK IT INC, CORONA (USDOT 1771311)
- CND LOGISTICS INC, SAN BERNARDINO (USDOT 1772436)
- P T I SAND & GRAVEL INCORPORATED, LAKE ELSINORE (USDOT 1773958)
- COUGAR TRUCK LINES INC, UNION CITY (USDOT 1774858)
← Browse All Carriers · California Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit
Compare the best FMCSA audit prep software →
Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: November 4, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile