CNC TRANSPORT LLC, DOT #3079367 FMCSA Safety & Compliance Report
13 to 15 trucks: $1,500 a month. Start by Dec 31 and it stays $1,500. From Jan 1 it's $1,950.
1 of your 10 roadside inspections in the last 24 months ended with an out-of-service order, most recently Texas on September 17, 2025.
Your latest, Illinois on July 30, was clean.
Your MCS-150 lists 14 trucks and 12 drivers.
Every violation on this list stays on your FMCSA record for 24 months and counts toward the scores FMCSA uses to choose carriers for an investigation. The investigator asks for the files behind each one.
CNC TRANSPORT LLC is a small fleet motor carrier based in PARKER, Colorado (USDOT #3079367). As of November 4, 2026, it holds a Not Rated FMCSA safety rating and a FileFlo Carrier Intelligence Score of 71/100 (Moderate Risk), based on 16 recent inspection(s) and 27 recorded violation(s) in public FMCSA data.
What CNC TRANSPORT LLC's record points to
- What out-of-service inspections trigger: the expedited safety audit (49 CFR 385.308)
Out of service on 1 inspection of 10 in the last 24 months, most recently September 17, 2025. - Have FileFlo run your compliance department
Driver files, renewals, Clearinghouse queries, MVRs, drug and alcohol testing and the audit packet, run for you.
Free FMCSA Audit · 60 seconds · No signup
Run a CFR-cited gap audit on CNC TRANSPORT LLC
Pulls the same Socrata data shown above. Grades against the rule pack FileFlo runs internally. Every gap names its 49 CFR section.
Take the book. Free.
238 pages on the paperwork side of trucking. Every checklist in it, yours.
The complete digital edition · Every checklist and template · Unsubscribe anytime
Free FMCSA record alerts
Is this your company? Get free alerts when this record changes.
FileFlo emails you the morning the public FMCSA record for CNC TRANSPORT LLC shows a new roadside inspection, an insurance cancellation or suspension notice, an authority change, the MCS-150 update coming due, or a safety rating change. Free, and FileFlo is not the DOT.
Turn on free alertsCarrier Intelligence Score
71/100 Moderate Risk
| Category | Score | Max |
|---|---|---|
| Safety Rating | 22 | 30 |
| Inspection Pass Rate | 15 | 20 |
| Out-of-Service Rate (vs FMCSA national avg) | 9 | 15 |
| CSA BASIC percentiles | Not measured | n/a |
Three public FMCSA components, scored by FileFlo. CSA BASIC percentiles are not in FMCSA's public data, so they are shown as not measured.
CNC TRANSPORT LLC's public FMCSA record, line by line
Roadside inspections in the last 24 months
- July 30, 2026, Illinois. No violations.
- June 29, 2026, Alabama. 1 violation, none out of service. Written up for over the hours-of-service limit (49 CFR 395.30).
- June 11, 2026, Colorado. 1 violation, none out of service. Written up for speeding (49 CFR 392.2).
- March 17, 2026, Oklahoma. 1 violation, none out of service. Written up for logbook missing required entries (49 CFR 395.8).
- Jan. 8, 2026, Illinois. No violations.
- Oct. 14, 2025, South Dakota. No violations.
Operating authority and insurance
FMCSA's licensing record shows MC1158507, motor property common carrier authority, granted on November 18, 2020.
CNC TRANSPORT LLC: PARKER, Colorado Trucking Company
CNC TRANSPORT LLC is a small fleet operating out of PARKER, Colorado with USDOT number 3079367. The company operates 14 power units and has no published FMCSA safety rating (most active carriers are unrated unless they have undergone a compliance review). Based on our analysis of federal safety data, CNC TRANSPORT LLC has a FileFlo Carrier Intelligence Score (CIS) of 71/100, classified as Moderate Risk.
FMCSA Safety Record & Inspection History
CNC TRANSPORT LLC has undergone 16 recorded DOT inspections. The vehicle out-of-service rate is 12.5%, which is below the national average of 20.72%, suggesting solid vehicle maintenance practices. The driver out-of-service rate is 6.3%, above the national average of 5.51%. Common causes include hours-of-service violations, expired medical certificates, and CDL issues.
Recorded Violations and Out-of-Service Status
The public FMCSA record for CNC TRANSPORT LLC carries 27 recorded violations, and the most recent inspection on file is dated July 30, 2026. Across 16 recorded inspections, the record carries 1 driver out-of-service violation and 5 vehicle out-of-service violations.
A recorded violation is what an inspector wrote down at the roadside. It is not a penalty, and it is not an amount owed: FMCSA assesses civil penalties only after a compliance review classifies specific cited violations. The step that changes this record is the document behind each line, so the next move is to see which records an investigator would ask for and which of them exist today.
What a 71/100 Carrier Intelligence Score Means
The Carrier Intelligence Score is FileFlo's own summary of three public FMCSA components for CNC TRANSPORT LLC: the safety rating, the inspection pass rate and the out-of-service rate against the national average. It is not an FMCSA score, and FMCSA does not use it to choose carriers for an investigation. 71 out of 100 falls in FileFlo's Moderate Risk band.
Authority Type, Hazmat Status, and Operating Profile
CNC TRANSPORT LLC is classified by FMCSA as an interstate carrier.
The carrier holds an Authorized For Hire classification, meaning it transports cargo or passengers for compensation under FMCSA operating authority and is subject to MC-number requirements at 49 CFR Part 365.
CNC TRANSPORT LLC is flagged in FMCSA Census as a hazardous materials carrier (HM indicator: Y). Hazmat carriers are subject to additional regulations under 49 CFR Subchapter C, including HM-126 reporting, HM-232 security planning, and the Hazmat Cargo Tank Annual Inspection requirement (49 CFR 180.407). Hazmat violations carry their own, higher penalty schedule, separate from the general FMCSA schedule.
Operational range per MCS-150 filing: interstate beyond 100 miles (long-haul, 5 drivers); interstate within 100 miles (short-haul, 5 drivers); intrastate beyond 100 miles (1 drivers); intrastate within 100 miles (1 drivers). The 100-mile boundary matters because drivers operating within a 100-air-mile radius qualify for the short-haul exception under 49 CFR 395.1(e)(1), which removes the requirement to maintain RODS for the day.
Self-reported MCS-150 annual mileage: 340,000 miles. MCS-150 mileage feeds the FMCSA SafeStat exposure denominator: drastically understated mileage can artificially inflate CSA BASIC percentile scores by reducing the per-mile exposure baseline. Updates are required every 24 months under 49 CFR 390.19.
Fleet Composition and Driver Profile
Owned equipment per the FMCSA Census filing: 2 tractors, 4 trailers. Owned-vs-leased equipment matters for compliance documentation, owned trailers require the carrier to retain annual inspection certificates under 49 CFR 396.17, while leased trailers shift that documentation responsibility to the lease agreement.
The carrier reports 6 CDL-holding drivers on file. Each CDL driver must have a current Driver Qualification File (DQF) maintained per 49 CFR 391.51, including a Medical Examiner's Certificate, an annual MVR review, and a record of road-test results.
Intrastate driver count: 2. Intrastate drivers may be subject to state-specific CDL endorsement and hours-of-service variances depending on the state.
FMCSA Crash History
The FMCSA Motor Carrier Management Information System (MCMIS) crash dataset records 4 crash events involving CNC TRANSPORT LLC in the available reporting window. Of these, 0 involved a fatality, 1 involved a reported injury, and 4 resulted in a tow-away. 4 events meet the federal-recordable threshold under 49 CFR 390.5 (fatality, injury treated away from the scene, OR tow-away of any vehicle).
Most recent recorded event: 55, YALOBUSHA, MS on June 17, 2026.
CNC TRANSPORT LLC's Inspection Fingerprint: Geographic Pattern and Trend
Inspections cluster geographically across Colorado (3), New Mexico (3), Illinois (2). The concentration in Colorado is consistent with the carrier's primary lanes and tends to correlate with which state DOT inspector teams CNC TRANSPORT LLC's drivers encounter most often at roadside checkpoints.
How CNC TRANSPORT LLC Compares to the National Average
Across the 16 recorded inspections, CNC TRANSPORT LLC's 12.5% vehicle out-of-service rate sits slightly below the FMCSA 2024 national average of 20.72%. The 6.3% driver out-of-service rate sits moderately above the 2024 national average of 5.51%.
Take CNC TRANSPORT LLC's compliance work off your plate
The plan for 13 to 15 trucks: $1,500 a month. Start by Dec 31 and it stays $1,500. From Jan 1 it's $1,950. FileFlo takes the driver files, the renewals, the chasing and the audit packet off your plate. FileFlo builds your files at the start, with no separate Setup fee.
- Every driver file built, then kept complete as records come in.
- FileFlo texts and emails your drivers directly about medical cards and CDLs, before they run out.
- MVRs and drug and alcohol tests asked for from your own providers, and chased until the record is on file.
- Annual Clearinghouse queries run for you once you name FileFlo in the Clearinghouse.
Start your compliance department →
Prefer to run it yourself? Software starts at $199 a month.
FileFlo
FileFloQuestions: sales@getfileflo.com
See the work: a sample audit packet · how FileFlo handles your data
Want the gap list first? Run the free FMCSA audit for CNC TRANSPORT LLC: sixty seconds, no signup, every gap cited to the 49 CFR section. See pricing. Read the founder's FMCSA Audit Survival Guide.
Broker or insurance agent? Partner program
Recent DOT Inspections: CNC TRANSPORT LLC
Open any inspection for the records an auditor would ask for behind it: free, from USDOT 3079367, no signup.
| Date | State | Driver OOS | Vehicle OOS | Next step |
|---|---|---|---|---|
| 2026-07-30 | IL | 0 | 0 | Audit check |
| 2026-06-29 | AL | 0 | 0 | Audit check |
| 2026-06-11 | CO | 0 | 0 | Audit check |
| 2026-03-17 | OK | 0 | 0 | Audit check |
| 2026-01-08 | IL | 0 | 0 | Audit check |
| 2025-10-14 | SD | 0 | 0 | Audit check |
| 2025-09-17 | TX | 0 | 3 | Audit check |
| 2025-05-27 | NM | 0 | 0 | Audit check |
| 2025-05-03 | NM | 0 | 0 | Audit check |
| 2025-03-26 | NM | 0 | 0 | Audit check |
Free · No signup
Run a free FMCSA audit on your fleet
Walks every 49 CFR section a new-entrant audit or compliance review actually checks. Every gap names the CFR section that cites it. No signup, no credit card.
Frequently asked questions about CNC TRANSPORT LLC
What is CNC TRANSPORT LLC's FMCSA safety rating?
CNC TRANSPORT LLC (USDOT #3079367) does not currently carry a published FMCSA safety rating. A "Not Rated" status is common for carriers that have never had a compliance review: it is not a negative finding. FileFlo scores the carrier at 71/100 (Moderate Risk) from the public inspection and out-of-service data that is available.
How large is CNC TRANSPORT LLC's fleet?
Per its most recent FMCSA MCS-150 filing, CNC TRANSPORT LLC operates 14 power unit(s) and 12 driver(s), classifying it as a small fleet. Fleet counts are self-reported to FMCSA and can lag a carrier's current operation.
Where is CNC TRANSPORT LLC based?
CNC TRANSPORT LLC is registered with the FMCSA at a physical address in PARKER, Colorado, under USDOT number 3079367.
What is CNC TRANSPORT LLC's DOT inspection and violation history?
FileFlo shows 16 recent DOT inspection(s) and 27 recorded violation(s) for CNC TRANSPORT LLC (USDOT #3079367), sourced from FMCSA public records and the Socrata transportation datasets. The inspection table on this page lists dates, states, and out-of-service counts.
What is CNC TRANSPORT LLC's FileFlo Carrier Intelligence Score?
CNC TRANSPORT LLC scores 71/100 (Moderate Risk) on FileFlo's Carrier Intelligence Score. The score normalizes three public FMCSA components (safety rating, inspection pass rate, and out-of-service rate versus the national average) into one 0-100 surface. CSA SMS BASIC percentiles are not published in FMCSA's public data and are excluded rather than estimated.
Federal rules a carrier like CNC TRANSPORT LLC is audited against
The 49 CFR sections a DOT compliance review actually checks, plain-English:
- 49 CFR 395.8, Hours of service & ELD records
- 49 CFR 391.51, Driver qualification files (DQF)
- 49 CFR 396.3, Vehicle inspection, repair & maintenance
- 49 CFR 382.301, Pre-employment drug & alcohol testing
Compliance terms: CSA score · out-of-service order · hours of service · driver qualification file. See DOT compliance software & document management →
More Colorado carriers on file
- AAA WATERPROOFING FRONT RANGE INC, BROOMFIELD (USDOT 3080455)
- TR TOPPERS INC, PUEBLO (USDOT 3087100)
- RAPID LLC, DENVER (USDOT 3094514)
- R & T REDI MIX LLC, LAMAR (USDOT 3097762)
- FLEET CORE INC, WATKINS (USDOT 3115228)
- RED-ZONE LLC, KERSEY (USDOT 3118294)
← Browse All Carriers · Colorado Carriers · 2026 FMCSA Penalty Guide · Free FMCSA Audit
Compare the best FMCSA audit prep software →
Data sourced from FMCSA public records and the Socrata transportation dataset. Last updated: November 4, 2026. Information may not reflect the carrier's current status. Dispute this record · Claim this profile